High-quality high-voltage pulse generator for electronic science

Features:

1. High-temperature arc igniter, with a high power output of 6-12V, instant ignition of cigarette paper, can operate continuously for 20 seconds at high frequency, good quality, easy to use. 2. It can be used as a high-voltage source for high school science experiments, electronic instruments, negative ion generators, and small science projects.

3. It can generate a high-temperature, high-frequency arc, easily igniting combustibles. 4. Based on the Tesla coil principle, the module produces a high-voltage pulse current, with a small size and high efficiency. 5. The peripheral circuit is simple (just plug in the switch and install the battery), and the discharge current is powerful. Specifications: Features: The high-temperature arc igniter, with a high power output of 6-12V, instantly ignites cigarettes and paper, can operate continuously for 20 seconds at a high frequency, is of good quality, and easy to use. It can be used as a high-voltage source for high school science experiments, electronic instruments, negative ion generators, and basic science projects. It can generate a high-temperature, high-frequency arc, easily igniting combustibles. Based on the Tesla coil principle, the module produces a high-voltage pulse current, with a small size and high efficiency. The peripheral circuit is simple (just connect the switch, install the battery), the discharge current is high. Specifications: Size: approx. 55 x 24 x 22 mm / 2.2 x 0.9 x 0.9 inches Input Voltage: 6V-12V Input Current: 0.5A-2A (depending on input voltage) Input Line Length: Approx. 10cm/3.94 inches High Voltage Type: DC Output Voltage: Approx. 80KV (Please take care when using for safety) Output Current: 0.5A Output Line Length: Approx. 10cm/3.94 inches High Voltage Pole Ignition Distance: ≤ 1.5cm (1.5cm is the maximum distance, 1cm is preferable) Note: 1. Input power of 6-12V, the two-level terminal output can produce a 1.5cm long high-temperature purple arc, instant ignition paper, a single high-voltage line can also discharge any metallic object, operating silently crackling. 2. Regarding input power: a 3.7V lithium battery can be used in series, such as an 18650 battery, an unused mobile phone battery (remove the protection board; recommended capacity greater than 2000 mAh), or a 4V nickel-cadmium/NiMH battery, or 12V lead-acid batteries (12V batteries work best). Module operating precautions: 1. Avoid powering on without a load. You must adjust the appropriate distance for the high-voltage terminal before powering on; the arc distance from the high-voltage line is proportional to the battery voltage and capacity. 2. The test arc distance ranges from short to long experimental lengths; it is forbidden to exceed the maximum arc distance (