Jigsaw,18v LXT Cordless Brushed Battery Jigsaw Variable Speed + 4 Blades (Battery and Charger Not Included),Compatible with Makita Battery

Package includes:
1 x Brushed Cordless Jigsaw (body only, no battery)
4x blades

The TEETOK for Matika cordless jigsaw has been developed to perform partings and cutouts in wood, plastic, metal, ceramic tile and rubber with a firm backing. It is suitable for straight and curved cuts with a miter angle up to 45°. Recommendations for saw blades must be observed.

💎NO-LOAD SPEED 0-2600 SPM AND ORBITAL ACTION À 4 POSITIONS💎Variable cutting speed can be achieved simply by pulling the trigger. With 0 to 3 personalized orbital settings, you can adapt the cutting movement to your needs. different cutting types and materials, higher orbital settings for softer materials and faster cutting; lower orbital setting for harder materials and more precise cuts. 45° and 5 blades💎 The adjustable aluminum base can be tilted to any angle. left or right straight until 45 degrees. Simple operation for curved and round cuts.
💎Toggle switch design. double security💎The interlock switch is used; to prevent accidental starting. To start the tool, first press and hold the unlock button, then press the power button. For safety reasons, the tool lock switch cannot be locked; it must remain pressed; throughout the process.
💎Rapid heat dissipation💎The heat dissipation window behind the jigsaw can quickly dissipate heat. Better heat dissipation for a longer lasting motor.

💎TOOL-FREE BLADE CHANGE AND DUST EXTRACTION💎 The quick blade change system saves you time and effort when processing diff. rent materials. A convenient dust outlet ensures a clean working environment.

Technical specifications:

Voltage: 18V
Power: 340W
Material: ABS shell
Number of wood cutting blades: 4 pieces
Model of Blade: T224D
Maximum wood cut 135mm
Maximum steel cut 10mm
Stroke length 26mm
Idle speed: 2600 rpm
Capacity Bevel: ±45°
Material: ABS

Use a saw blade; fine teeth for most laminates and woods. To reduce edge chipping, clamp scrap wood at both ends and sides. Then cut the old wood when sawing.

THE LINES OF PEDESTRIAN CROSSINGS

Do not use the pendulum stroke when cutting narrow circular lines or angles.

plunge saws

Only soft materials such as wood, cellular concrete, plasterboard, etc. can be cut with the plunge saw method!

METAL CUTTING

Use a thin blade; fine teeth for ferrous metals and a blade with coarse teeth for non-ferrous metals.