Koerper Pack of 4 PIR Infrared Sensors DC 12V 24V Automatic Switch Outdoor Motion Detector Switch for LED Strip/Bulb

Infrared sensor switch: motion detector. The detection range is approximately 8 meters and the detection angle is 120°. This motion detector has a continuous trigger mode; when a person is detected, the charging indicator light illuminates, and if the person is not within a certain range (F), the charging indicator light automatically turns off. Stable light: DC 12V/24V PIR infrared sensor - adjustable soft and stable light without flickering. The motion detector switch is activated when a moving body enters the field of view, with an adjustable hold time of 1 to 10 minutes after the movement ceases. Adjustable delay switching time: 1-10 minutes. Set the delay time before the charging cuts off using the button on the back of the switch. This means the infrared sensor switch detects and adjusts the lighting duration each time a person or object passes by. Easy to install and use: first connect the charging cables, then the power cables to ensure there is no short circuit between the infrared motion light's cables before turning on the device, then set the delay time. Technical data: Motion - Supply voltage: 12-24V - Current: 6A. Induction distance: 5~8m. Infrared sensor switch. Motion: the detection range is approximately 8 meters and the detection angle is 120°. The trigger mode of this motion detector is continuous. When a person is detected, the charging indicator light illuminates. If the person is not within a certain range, the charging indicator light automatically turns off. Adjustable delay switching time. Adjustable 12V/24V DC PIR infrared sensor, 1 to 10 minutes. Set the load cut-off delay time using the button on the back of the switch. This means that whenever a person or object passes by, the infrared sensor switch detects it and adjusts the lighting duration. Features: 1. Easy to install and use. 2. Provides soft, stable light with no flickering. 3. Easily turn the light on and off automatically. The switch can detect human body infrared and use it to control the load. 4. Depending on actual needs, the human body sensors are installed in the appropriate environment. Automatic and light-sensitive infrared sensor switch: The high-quality plastic waterproof infrared motion detector measures approximately 76 x 35 x 26 mm.

Power Parameters:
1. Power Supply: DC 12V - 24V.
2. Dimensions: 76 x 35 x 26 mm.
3. Output Power: 200W.
4. Extended Time: 30-500 seconds (adjustable).
5. Range: 5-8 m.
6. Detection Angle: 130-degree left and right lighting angle, 110-degree up and down lighting angle.
7. Sensitive Brightness: 7 Lux ± 2 Lux.
8. Color: White.