KZQ Brass Ceramic Faucet Valve Replacement Cartridges 2 Pieces (Red + Blue)

Features:

Superior Quality Material: Our quarter-turn faucet cartridge is made of high-quality brass and ceramic, making it sturdy and durable.

Valve Insert: The replacement faucet valve has a black rubber locking washer, which seals the faucet well to prevent leaks.

Good Sealing: The replacement faucet valve has an easy-to-use black rubber locking washer, which seals the faucet well and prevents leaks.

Widely Used: Two brass faucets for bathrooms, kitchens, etc.
Color: Blue, Red

Material: Brass, Ceramic

Height: 85 mm

(Please check the image for detailed dimensions)

Spline Diameter: 7.6 mm

Teeth on Spline: 20 teeth

Thread: 3/4 BSP

Maximum Voltage: 3.5 kPa

High Operating Temperature: 90°C
Rubber O-ring at the bottom

Note:

1. Please allow 1-3 cm error due to manual measurement, thank you.
2. Please carefully check the dimensions before ordering to ensure Compatibility with your model.

Dimensions: There are 20 gears above the valve core, the outer diameter is 7.6 mm, the inner diameter is 4 mm, the total length is 82 mm, 3/4" BSP thread. 20 teeth on the splines.

High quality: Our quarter-turn tap cartridge is made of high-quality brass and ceramic, which is robust and durable enough to withstand high temperatures, serving you for a long time.

Good seal: This tap valve has an easy-to-use black rubber locking washer to seal the tap, preventing leaks and avoiding the need to replace the tap again, making your life easier. Color distinction: The red and blue O-rings at the bottom of the coil make it easy to distinguish and install; cold water is indicated by a blue ring, hot water by a red ring. Widely used: Two ceramic taps for bathroom, kitchen, etc. Can be used for single or double hot and cold water faucets. Please carefully check the dimensions in the photo before purchasing to ensure it will fit your faucet.