Makita Dhr243rmj 18 V Li-ion Lxt Brushless Rotary Hammer Complete With 2 X 4.0 Ah Li-ion Batteries And Charger In A Makpac Case

The Makita DHR243RMJ SDS Plus 3 Mode Hammer Drill has an efficient brushless DC motor. Has a quick change drill chuck and a easy-to-grip handle ergonomically designed to give maximum power thrust and provide a sure and comfortable grip in any operation; overhead application, drilling with palm-up or palm-down grip. The tool body is separated into the upper and lower housings at the foot of handle portion where the houses are jointed with vibration absorbing cushion rubbers. Unique rubber joint construction suppresses the transmission of vibration to battery terminals, minimising battery failures such as terminal breakage or poor electrical contact. Has 3 modes of operation rotation and hammering, hammering only and rotation only. DHR243RMJ: 2 x 18 Volt 4.0Ah Li-Ion Batteries.DHR243Z: Bare Unit, No Battery or Charger Supplied. Specification No Load Speed: 0-950/min.Blows per Minute: 0-4,700/bpm.Impact Energy: 2.0 Joules.Capacity: Concrete: 24mm, Steel: 13mm, Wood: 27mm.Weight: 3.3kg. All vibration figures quoted are Tri-axial to EN60745 2006. Vibration: Drilling: 3.5 m/sec.Vibration K Factor: 1.5 m/sec.Vibration: Hammer Drilling: 13.5 m/sec.Vibration: Chiselling: 10.5 m/sec. The Makita DHR243RMJ SDS Plus 3 Mode Hammer Drill is supplied with: 2 x 18 Volt 4.0Ah Li-Ion Batteries1 x Depth Stop1 x Side Handle1 x Quick-Change Chuck1 x 14.4-18 Volt DC18RC Compact Li-Ion Charger1 x Makpack Case

Additional Info