Minuteur électronique DC12V 16A 16 programmes Écran LCD programmable

Operating Voltage: 220V/50-60Hz

Custom Voltage: 12V, 24V, 36V, 48V, 110V, 380V/50-60Hz DC

Control Output: 16A (direct), can also be used for extension control

Setting Time: 16 on/off cycles (day/week)

Stay Time: 1 minute to 168 hours

Travel Time Error: 1s/24h

Power Failure Memory: 180 days (built-in 1.2V rechargeable battery)

Dimensions: 60x60x32mm

Installation method: screws, connector connection (with casing, a 72x72mm panel can be installed)

Product application: advertising light boxes, broadcasting equipment, and other electrical appliances, etc.

1) Microcomputer chip, liquid crystal display, precise timekeeping, simple operation, high accuracy, industrial grade, powerful anti-interference chip.

2) Large LCD display setting and operating prompt function.

3) Built-in rechargeable battery; no need to reset the program after a power outage, and saves the setting memory for more than 60 days after power-off (the rechargeable battery is used for power-off and program memory, not for controlling the machine's power supply).

4) Optimized copper foil structure, longer lifespan, mode function, switch status at any time.

5) Small, multifunctional, lightweight, and compact, and easier to install.

Instructions for use:

For example, "turn on at 6:00 AM and turn off at 7:00 AM; turn on at 11:00 AM and turn off at 12:00 PM; turn on at 6:00 PM and turn off at 12:00 PM." This type of setting can be configured with up to 16 switching programs in total. The minimum control period is 1 minute and the maximum control period is 168 hours.

It can be cycled daily or weekly.

Technical parameters:

Display device: LCD

Power consumption: <1W

Net weight of product: 80G

Operating temperature: -20℃~+55℃

Operating voltage: 220-240VAC 50-60Hz

Customizable voltage: 12V, 24V, 36V, 48V, 110V, 380V

Time range: 1 minute to 168 hours;

Travel time error: 1S/24H 25℃;

Travel time: 16 switching times (day/week)

Battery Internal: 1.2V/40mA (rechargeable battery)

Dimensions: 60*60*32mm

Installation method: screws

The connector connection conforms to standard: GB/T14536.1

Uses:

1. It is used for timing the charging of mobile phones, car batteries, and battery-powered vehicles, and for time control switching.

2. Used in electric water heaters, electric radiators, rice cookers, humidifiers, oil-filled electric heaters, air purifiers, and other household appliances to achieve automatic switching of household appliances. For example, the timer can ensure that the electric water heater prepares hot water when you wake up and the joy of the day begins.

3. In areas where peak and valley electricity prices apply, the timer will be effective in allowing you to use valley electricity rates. 4. It is used for controlling streetlights, advertising light boxes, complete distribution boxes (very suitable), facade lighting, and exterior building walls for time switches. While improving brightness, it also allows you to save on reasonable expenses. 5. Used for regular garden irrigation, regular drainage, and aquarium breeding. 6. It is used to monitor video synchronization switches, school broadcast synchronization, etc. Various uses.

The product can be set to 16 groups per day, namely: 16 opening and 16 closing times, direct control wiring, the controlled electrical devices must be powered by single-phase (220V), rated power consumption capacity (resistive load 16A, inductive load 8A)

Wiring diagram description:

1. The "switch" is a switch that is not connected to the "power" or "current" supply and controls only one live wire.

2. The timer does not have a voltage transformation function and cannot input AC220V and output DC12V. The timer has only one input (supply voltage) and no output. It is not a common type of timer with two inputs and two outputs. The new wiring method can control non-standard lines such as telephone lines.

3. It can control different voltages from the "power supply," such as AC220V, but it can also control the activation and deactivation of one of the lines of the external DC12V power supply.

4. The switch is off when not in use and no current can flow. Those more comfortable powering the machine should note the voltage (AC220V is commonly used at home).

Instructions:

1. Setting Beijing Time: While pressing the "clock" button, press the "minute," "hour," and "week" buttons to set Beijing time.

2. Setting the Timing:

A. Press the "timing" button; the lower left corner of the screen will display "1 ON" (indicating the first time to turn on). Then press the "minute" and "?" buttons respectively.

B. After pressing the "timing" button, the word "1 OFF" will appear in the lower left corner of the display (indicating the time of the first shutdown). Then press the "minute", "hour", and "week" buttons respectively to enter the desired shutdown time. C. Continue pressing the "timing" button; the lower left corner of the display will cycle through (2 ON, 2 OFF…16 ON, 16 OFF). Refer to steps A and B to set the switching time for each subsequent time. If you only need to turn the device on and off once, you must press the "Cancel/Resume" button to cancel the previously set time. D. Press the "set" button, then press the "week" button. You can set the same time every day, a different time every day, the same time from Monday to Friday, Monday to Saturday, or the same time but different times from Saturday to Sunday.

Troubleshooting:

1. If the switch does not light up when the switch is turned on, or if the off time does not turn off after turning it on, check if the "week" setting is correct; if not, please readjust it.

2. If it is confirmed that the "on" and "off" times are set correctly, but the switch is on when it should not be on, or off when it should not be off, please check if the excess time is correct. If not, please refer to the method introduced in "Setting the Time" to eliminate it (note: the switching time display "--:--" means elimination, do not assume that "00:00" means elimination).

3. If both of the above are correct, but the switch still does not function normally, please check if it is in the automatic position.

Precautions:

1. To avoid electric shock and heat generation under high current, the product should be used with electrical appliances and the power supply should be firmly connected.

2. The incoming line of this switch can only be connected to the specified supply voltage, not to other power sources. Damage caused by incorrect wiring is not a quality issue (for special voltage specifications, please order). 3. For equipment (such as medical equipment and large machinery, etc.) that could cause fatal accidents or have a major impact on society due to a timer control switch error, please do not use this control switch. 4. The switch must operate in an environment free from moisture, corrosion, and heavy metals. Do not contaminate it with oil or water. 5. The service life of this timer is one year. In case of any quality problems within one year, it will be replaced or repaired free of charge (excluding self-removing parts). Please read the manual before installing and using the product. Keep it for future use.