1/4
Motion Sensor Night Light, Induction Lamp, Practical for the Body, 120° Detection Angle, for Drawers, Bedrooms, Kitchens, Wardrobes
Of which environmental contribution £0.01 including VAT.
Sold by Sinocor GmbH
You may also like
Compare with similar items
Product information
Description
1. Built-in PIR motion sensor: when a human body is detected within range, it turns on immediately and automatically turns off after the person leaves.
2. Equipped with 20 LED lamp chips, providing sufficient brightness and low power consumption, it is suitable for nighttime lighting.
3. 120° detection angle, detection distance exceeding 9.8 feet, detection methods: normally on + infrared induction of the human body.
4. Easy to install and remove, and can be attached to the surface of any non-iron item using the included double-sided adhesive tape.
5. Suitable for lighting stairs, drawers, kitchens, bedrooms, wardrobes, workshops, shelves, attics, closets, basements, hallways, headboards, tree trunks, etc.
Material: Aluminum + PC
Weight: Approx. 109g/3.8oz
Size: Approx. 185 x 30 x 17 mm / 7.3 x 1.2 x 0.7 inches
Battery Type: Class A lithium battery (built-in)
Battery Model: 18650
Rated Battery Capacity: 800mAh
Charge and Discharge Cycles: Over 500 times
Battery Life: 60 days (induction mode)
Charging Voltage: 5V
Number of LED Lamp Beads: 20 pieces
Detection Distance: Over 3 meters / 9.8 feet
Detection Angle: 120°
Induction Method: Normally On + Human Body Infrared Induction
Induction Mode: I: Power On/Normally On, II: Human Body Induction Mode + Light Sensor, III: Power Off (short press on the switch)
Dimming Mode: I: On/Always On, II: Press and hold for 3 seconds to change color, III: Press briefly for induction mode, IIII: Off
2. Equipped with 20 LED lamp chips, providing sufficient brightness and low power consumption, it is suitable for nighttime lighting.
3. 120° detection angle, detection distance exceeding 9.8 feet, detection methods: normally on + infrared induction of the human body.
4. Easy to install and remove, and can be attached to the surface of any non-iron item using the included double-sided adhesive tape.
5. Suitable for lighting stairs, drawers, kitchens, bedrooms, wardrobes, workshops, shelves, attics, closets, basements, hallways, headboards, tree trunks, etc.
Specification:
Item Type: Motion Detector.Material: Aluminum + PC
Weight: Approx. 109g/3.8oz
Size: Approx. 185 x 30 x 17 mm / 7.3 x 1.2 x 0.7 inches
Battery Type: Class A lithium battery (built-in)
Battery Model: 18650
Rated Battery Capacity: 800mAh
Charge and Discharge Cycles: Over 500 times
Battery Life: 60 days (induction mode)
Charging Voltage: 5V
Number of LED Lamp Beads: 20 pieces
Detection Distance: Over 3 meters / 9.8 feet
Detection Angle: 120°
Induction Method: Normally On + Human Body Infrared Induction
Induction Mode: I: Power On/Normally On, II: Human Body Induction Mode + Light Sensor, III: Power Off (short press on the switch)
Dimming Mode: I: On/Always On, II: Press and hold for 3 seconds to change color, III: Press briefly for induction mode, IIII: Off
Package List:
1 x Motion Detector
1 x USB Cable
1 x English Manual
Note:
1. Please allow 0-2cm error due to manual measurement. Thank you for your understanding. 2. Monitors are not calibrated the same, item color displayed in photos may be showing slightly different from the real object. Please take the real one as standard.Features
- BrandTEHTUY
- Length18.5 cm
- Width3 cm
- Height1.7 cm
- Weight109 g
Advice from
Burglar alarm buying guide
A burglar alarm is the best way to deter any potential intruders. Designed to monitor your home and sound the alert in case of an intrusion, a home alarm system can send you a remote warning or automatically notify the authorities. Looking for the perfect security alarm for your home? Read on to find out more.
'/%3E%3C/svg%3E)
You are here:
'/%3E%3C/svg%3E){kind=small}