Motorcycle Bearing Puller Tools, 9-23mm Universal Inner Bearing Puller Tool

The surface treated with oxidation resistance, anti-rust and durable.

COMPLETE PACK: A set of bearing pullers equipped with 5 sizes of open clips to meet needs, 0.35 inch (9 mm), 0.43 inch (11 mm), 0.55 inch (14 mm), 0.74 inch (19 mm), 0.91 inch (23 mm).

How to use: 1. Choose a suitable extractor (slightly smaller than the inner diameter); 2. Use the tip of the screw to turn clockwise, so that the puller opening remains open and hooked to the inner diameter of the bearing (or the inner wall of the outer race); Note: The extractor opening must be open, otherwise the head may slip or be damaged.3. Install the support sleeve (the inner wall of the sleeve must be larger than the outer diameter of the bearing outer ring). 4.After adjustment, insert a screwdriver (or open-end wrench) into the upper hole of the clamp screw, or use an adjustable wrench to screw the nut below to remove the bearing.