Motorcycle inner bearing puller removal kit, internal bearing puller removal tool set with 5 sizes of open clips (9-23 mm).

Ideal motorcycle bearing removal tool: Connect the drill to a 1/2" 3/4" external thread. Use to remove sleeve-type bearings with a diameter of 9mm to 23mm. Note: For bearings that were quite tight, you will need a slide hammer to do the job. Wide range of applications: Compatible with motorcycle wheels, bicycle wheels, car steering wheels, generator bearings, pump bearings, machine bearings, etc. This is a good motorcycle bearing removal tool suitable for individuals, shops, and repair workshops. Easy to use: Select the sleeve head corresponding to the inner diameter of the bearing, then click it into the inner diameter of the bearing. Turn the screw clockwise firmly to support the three tabs of the sleeve. After installation, use a wrench to turn the nut until the bearing is pulled out smoothly. High-quality materials: The bearing puller set is made of high-quality chrome vanadium steel with high strength and hardness. It undergoes overall heat treatment, and the surface is coated with an anti-oxidation, anti-corrosion, and anti-rust coating, ensuring long-lasting use.

5 sizes of open clips: The internal bearing removal tool kit is equipped with 5 different sizes of open clips: 9mm, 11mm, 14mm, 19mm, 23mm. Meets most of your needs.

Motorcycle Inner Bearing Puller Kit (9-23MM) Motorcycle internal bearing removal tools are suitable for sleeve bearings from 9 to 23mm (0.35 to 0.91 inch) such as motorcycle wheels, bicycle wheels, car flywheels, generator bearings, etc. They offer good wear resistance and do not deform easily. This will be your ideal tool.

Application scenarios

Suitable for motorcycle wheels, bicycle wheels, automatic steering wheels, generator bearings, etc.

Precision Craftsmanship Precise external thread, hardenable process, strict testing to make it precise. Rustproof and Durable Constructed of chrome vanadium alloy, durable surface treatment and anodized, rust-free. Complete Accessories Professional quality, complete accessories, to ensure efficient car repair. Unique Open Clip Design The puller group is connected to the inner bearing, open clip design, precise positioning, pulls out evenly and does not damage the accessories. Instructions for use: 1. Choose an appropriate extractor (slightly smaller than the inner diameter); 2. Use the tip of the wrench to screw clockwise so that the extractor opening is held open and hooked onto the inner diameter of the bearing (or the inner wall of the outer ring); Note: The extractor opening must be open, otherwise the head may slip or be damaged. 3. Install the support sleeve (the inner wall of the sleeve must be larger than the outer diameter of the bearing's outer ring); 4. After adjustment, find a screwdriver (or a round bar) and insert it into the upper hole of the rotating wrench, or use an adjustable wrench to tighten the nut underneath and pull out the bearing.