Motorcycle inner bearing removal kit – 5 sizes of open clips 9-23 mm – Chrome vanadium steel – Anti-oxidation and anti-corrosion

General Description:

An ideal tool for motorcycle bearing removal, this kit is designed to remove sleeve-type bearings with a diameter of 9 mm to 23 mm. It is particularly effective for tightly fitted bearings and requires a slide hammer for optimal operation. This kit is suitable for individuals, 4S shops, and repair shops, offering a wide range of applications, including motorcycle wheels, bicycle wheels, automotive flywheels, and generator bearings.

Technical Specifications:

• Compatible bearing diameters: 9 mm to 23 mm

• Material: Chrome vanadium steel

• High strength and hardness

• Coating: Anti-oxidation, anti-corrosion, and anti-rust

• 5 open clip sizes: 9 mm, 11 mm, 14 mm, 19 mm, 23 mm

Installation:

• Choose a suitable puller (slightly smaller than the inner diameter);

• Use the tip of the screw to turn clockwise so that the puller opening is held open and hooked onto the inner diameter of the bearing;

• Install the support sleeve (the inner wall of the sleeve must be larger than the outer diameter of the bearing's outer ring);

• After adjustment, use a screwdriver or adjustable wrench to tighten the nut underneath to remove the bearing. Note: The puller opening must be open, otherwise the head may slip or be damaged. To use this tool, select the sleeve head that matches the inner diameter of the bearing, snap it into the bearing, and then turn the screw clockwise to support the three tabs of the sleeve. Once installed, use a wrench to turn the nut until the bearing is removed smoothly.

Other information:

This kit has good wear resistance and does not deform easily, ensuring long-term durability.