Multifunction TFT Transistor Tester Graphical Display Diode Triode Capacitor ESR Resistance NPN PNP MOSFET

1. Can measure triodes, diodes, resistors, capacitors, inductors, thyristors, field effect tubes, voltage regulator tubes, dual diodes, light emitting diodes, etc. 2. Can measure voltage 3. Built-in lithium battery, long battery life illustrate: Please use external 5V power supply or mobile phone USB power supply for charging. @The light is red to indicate charging, and the green light indicates charging is completed. Warm reminder: The charging input voltage is 6V, please do not use it with overvoltage, otherwise the tester will be damaged and the battery may explode. 4. Infrared decoding function Point the infrared remote control at the “IR” test hole of the tester and press the button on the remote control.If the tester decodes successfully, the user code and data code will be displayed, along with the corresponding infrared waveform. If decoding fails or cannot be decoded, the user code and data code will not be displayed at this time, if you are in the tester interface, you cannot enter the infrared decoding interface. The last successful decoding information will always be displayed. The dot in the upper right corner is used to indicate whether infrared data from the remote control is being received. Red indicates infrared data is received and blue indicates decoding is successful.【Wide Applications】 --- A multi-function color screen test instrument that can measure triodes, diodes, resistors, capacitors, inductors, thyristors, field effect transistors, regulators, dual diodes, light emitting diodes, infrared decoding. Supports infrared coding: 0.0130V zener diode automatic detection. Self-test with automatic calibration. Support infrared coding 【Infrared waveform display】--- Infrared waveform display. Infrared reception instructions. The measurement results are displayed by the TFT graph. Function: Used to test the capacitance and resistance of diode transistors. Automatic shutdown (timeout setting) Structure: This transistor tester has a built-in high-capacity rechargeable lithium-ion battery. Lithium-ion battery voltage detection. 5.Automatic Calibration Short the three test sockets and press the multi-function button, and the tester will automatically calibrate. After disconnecting the short wire according to the instructions during the calibration process, no further operation is required. LCR-TC Transistor Tester, Color Screen, Graphical Display, Finished Product Precautions: (1) Discharge before measuring capacitance, otherwise online or live testing is not recommended; (2) There is a high voltage of 30 V in the three holes of the KAA of T7 and TC1. They are specially designed for testing voltage regulator tube. Don't mix them, otherwise they will toast. (3) The output current of the tester is 6mA/voltage <5V. High power IGBTs, thyristors and Darlington tubes which require larger current/higher voltage cannot be tested.Air core coils and power inductors cannot directly measure inductance. . It is recommended to try testing an appropriately colored ring inductor in series. For capacitors smaller than 20, it is recommended to test with a 20 capacitor. These are empirical suggestions. Please refer to the actual situation for details. Weight 110 grams, packaging dimensions 13x9x3cm, English version The English version is delivered by default.