NuaSol Photovoltaic Solar Panel Mount 1 Mounting Set Tile Roof Fastening

NuaSol - Roof mounting kit for a solar module

NuaSol - DoItYourself roof mounting kit for a solar panel

NuaSol offers you various mounting materials for attaching your mini PV system or balcony power plant. From hanger bolts to roof hooks to Z-brackets, you will find the right mounting material for every type of installation.

The roof mounting set contains all components necessary for mounting your solar modules on the roof of your house.

The preparation

1: Fasten roof hooks underneath the profile 2: Fasten end clamps on the ends 3: Set end caps

Everything included!

This comprehensive roof mounting set for solar modules contains all the components needed to mount a solar module on the roof of your house

Simple mounting

1: Prepare profiles 2: Lift roof tiles 3: Screw on roof hooks 4: Hook in solar modules 5: Tighten end clamps

Suitable for solar modules with a height of 35 mm!

Details

Dimensions profile: 1230 x 40 x 40 mm

Dimensions end clamp: 70 x 34 x 28.6 mm

Dimensions end cap: 43 x 20 x 43 mm

Roof hooks

Our weatherproof, stainless steel Z-brackets are completely pre-assembled. Our special roof hooks are suitable for the removal of aluminium rails, profile rails, fastening rails and for holding photovoltaic modules or solar systems.

NuaFix roof hooks in detail

• Material: Stainless steel (SUS 304)
• Flat steel hook: 60 x 30 x 5 mm
• Length of hook inside: 115 mm
• Dimensions base plate: 140 x 54 x 5 mm
• Mounting holes: 9 x 9mm offset
• Height adjustment of base plate: 44-47 mm
• Height adjustability flat steel hook: 60-92 mm
• Slotted hole measurement: 45 x 11 mm
• Total height adjustment: 120-160 mm
• Overall dimensions: 174 x 140 x 120-160 mm
• Suitable screw: M10x25 A2 stainless steel
• Matching nut: M10 stainless steel A2
• Max. snow load: approx. 140kg
• Wind speed: max. 60m/s
• Weight piece: 0,76 kg

Aluminium profile

The aluminium profile, made of high-quality AL5005-T5, impresses with its weather resistance and provides space for solar panels with a width of up to 1150 mm.

Screw set

You simply fix the roof hooks with the 12 stainless steel wood screws under the tiles. The solar panel is attached to the aluminium profile with the clamps.

End clamp

The end clamps made of aluminium AL6005-T5 fix the solar module to the aluminium profile. Push the end clamps into the rail, screw them tight, done!

End cap

4 EPDM end caps prevent dirt and rain from penetrating the aluminium profiles.

EXTEND YOUR ALUMINIUM PROFILES

Scope of delivery

• Mounting rail 2x 1230mm
• 4x end clamp
• 4x hexagon head screw
• 4x flange nut
• Adjustable roof hook assembly 4x (4x L-base; 4x Z-part; 4x L-joint; 8x carriage bolt M10x25; 8xM10 flange nut)
• 4x rail cap
• 12x wood screws