OPCOM 2012V Firmware Opera V1.99 CAN OBD2 USB Interface Diagnostic Tester, Black MUMU

Provides complete status information (current, non-existent, temporary);

You can print, save or copy fault codes to any other application;

You can directly access the measurement block menu from the fault code menu.

Displays fault information from multiple control modules.

Can display 8 measurement parameters at the same time;

The sampling rate largely depends on the communication protocol.

< p>1. Covers almost all Opel vehicles, including new cars with CAN-BUS diagnostic function, such as Vectra-C, Astra-H, Zafira-B.
2. The program allows you to read and erase fault codes, view live data and perform output tests.

3. The program supports many control units, including: B. Engine, automatic transmission, ABS, airbag, engine cooling module, instrument cluster, electronic climate control, electronic control unit, etc.

4. Since Opel uses multiple pins in the OBD connector, the diagnostic interface acts as a multiplexer and selects the appropriate pin for communication.

PIN3, PIN7, PIN8, PIN12 = Serial connection (ISO9141, KW81, KW82, KWP2000). )

5. The fault code is displayed with all available information:

Full description of the fault code text:

1) Full information about the status (present, not present). (present, flashing)

2) You can print the fault codes, save them or copy them to any other application. From the error code window, you can directly access the measurement block window.

3) The program displays measurement information from blocks of multiple control units, which you can select from the list.

4) The program can display 8 measurement block parameters at the same time. The sampling rate is highly dependent on the communication protocol. For example, older systems like Omega-B-2000 and newer CAN-based system control systems are very fast!

You can also perform output tests on multiple controllers.

PIN6-PIN14

PIN3-PIN11

PIN1

HSCAN - High speed, 500 kbps, two-wire CAN BUS

MSCAN - Medium speed, 95 kbps, two-wire CAN BUS

SWCAN - Single-wire CAN BUS, low speed, 33.3 kbps

Package Contents:

1 COM OP Port

1 USB Cable

1 CD with software and drivers for PC

Note: Only Win XP and Win 7 operating systems are available. 32 bit. supported, other systems are not supported.