Portable Digital PH Chlorine Tester Water Quality Tester Water Tester Chlorine Meter Swimming Pool Spa Water Quality Monitor Checker

• High Quality: Made of premium plastic shell, durable and sturdy, and it has a long service life. Easy to use, no more need for traditional chemicals. This provides a consistent reading regardless of temperature fluctuations; High and low alarm outside the parameters, data logging with software.
• Easy to use: Easy to use, no more chemicals needed. The high-precision algorithm chip and electrode of our digital water pH tester ensure accurate and fast response. A practical tool for testing water pH and chlorine level for swimming pool and spa.
• Healthy Protection: This electronic pH and chlorine tester is a practical tool for testing water pH and chlorine level for swimming pool and spa, ideal for simple operations to test pH and CL2 water, no more chemicals or guesswork.
• Large Screen: Large screen displays the test result on pH and chlorine level for easy and accurate reading. The design ensures that you can read the measurement results under any condition. The read-at-a-glance function One button can lock the reading even if the tester is taken out of the sample.
• Lightweight: Lightweight and compact, easy to carry. With a hole for convenient hanging. Ideal for simple operations to test the PH and CL2 of water, no more chemicals or more labor. It does not need too many steps. Lightweight and easy to carry, keep your pool/spa water safe, comfortable, and corrosion-free.

Setting Points: Before first use, set the tester for the pool water or hot spring water to be tested in the following order:
1. Test the pool water or hot spring water using traditional liquid testing tools;
2. Record the chlorine gas reading for future use (1.5 PPM);
3. No pH adjustment is required.
Find the tester's set point:
A. Place one 1.5V AA battery in the battery compartment on the handle (positive side up).
B. Hold the tester in one hand and the test stick in the other.
C. Insert the cleaned metal rod into the water until it reaches the black position.
D. Use a metal rod to gently stir the water.
E. While the metal rod remains in the water, adjust the knob on the front of the watch toward CL until it stops moving. Then slowly adjust it to the right until the pointer points to the position of the result measured by the traditional liquid testing tool (e.g., 1.5).
F. Remove the test rod from the water, being careful not to move the knob. The pointer will slide to the right and stop at a letter between A and E. This letter is the adjustment point.
Note: Before each chlorine test, the meter must be set to the " set point".

Testing the pH value: The recommended chlorine content of swimming pool water or hot spring water is 7.2 to 7.8 A) Leave the test stick in the water and adjust the knob towards pH until a beep is heard (the battery must be removed when reading the pH value). B) Wait until the needle stops moving, then take a pH measurement. C) Gently dry the test stick, insert it into the slot on the side of the tester, and store it.

Testing the chlorine level: The recommended chlorine level for pool or spa water is 1.2 to 1.7 ppm. A) Set the pointer to the "Set Point" position. B) Holding the tester in one hand and the test rod in the other, insert the metal rod into the water until it reaches the black dot. Wait for the needle to stop moving before reading. C) Leave the test stick in the water and continue to Perform the pH test according to the instructions.

Specification
1. Essential tools for swimming pools, saunas and spas
2. Ideal tool for simple measurement of pH and C12 value of water
3. No chemicals, no guesswork in measurement
4. Chlorine levels within the safe measuring range: 1.2 to 1.7 ppm
5. Safe measuring range of pH level: 7.2-7.8
6. Battery: Use 1 AA battery

Storage Method:
To extend the life of the PC-101 pool tester and ensure accurate measurements, please note:
1. When not in use, please set the knob to the closed position (adjust it in the PH direction until it can no longer move).
2. Store in a cool, dry place away from direct sunlight.
3. Never immerse the test rod in any liquid other than pool water or hot spring water.
4. Check the battery regularly to see if it is fully charged - the tester uses one 1.5V "AA" alkaline battery.