Remote control for roller shutters, compatible with Somfy Keytis 2, 4 RTS, Keygo, Telis 433 MHz

Please note that this is a compatible remote control and not an original product. Frequency: 433 MHz Channels: 4 Battery: Alkaline 12V/27A List of compatible devices (RTS only): Keytis NS 2 RTS / Keytis NS 4 RTS Keytis 2 RTS / Keytis 4 RTS Keygo 4RTS Elis 1 RTS / Telis 4 RTS Elis Soliris 1 RTS / Telis 4 Soliris RTS Elis 1 Modulis RTS / Telis 4 Modulis RTS Compatible with similar receivers and gate openers: AX24ns, AC230ns, Axovia, Elixo, Ixengo, Axorn, AxRoll, Passeo, Dexxo, FreRoll, Oximo RTS, Orea RTS, Altus RTS, LT CSI RTS. Keytis black programming. 1. Open the receiver housing. It is located near the motor. 2. On the receiver board, press the Prog 1 programming button until the L1 LED lights up. 3. Press a button on your new remote control, then release it. The receiver LED will flash and then turn off. 4. Wait 10 seconds. Your new remote control is programmed. Programming the white Telis remote control with a hidden button: 1. Press the hidden button on the old remote control for 2 to 3 seconds. 2. On the new remote control, simultaneously press buttons 1 and 2 for approximately 1 to 2 seconds, then press button 4 for 1 to 2 seconds. Your remote control is now ready for use. Contents: 1 remote control.