Ronseal 10 Year Exterior Woodstain in Walnut - 250ml, Long-Lasting Protective Finish

Description

• This high-quality wood stain provides long-lasting protection for exterior wood surfaces such as doors and windows. It offers a durable, weather-resistant finish that can last up to 10 years, enhancing the natural beauty of the wood with a satin sheen. The stain is easy to apply directly to clean, prepared wood without the need for primers or base coats, making it suitable for DIY projects and professional use alike.

Specifications

• Usage: Exterior smooth planed doors and windows
• Coverage: Up to 18m² per litre
• Drying time: Rainproof in 1 hour, fully dry in 12 hours
• Application: Brush
• Number of coats: 3 coats recommended
• Finish: Satin
• Durability: Lasts approximately 10 years
• Colors available: Antique Pine, Black Ebony, Dark Oak, Natural Oak, Deep Mahogany, Natural Pine, Mahogany, Oak, Smoked Walnut, Walnut, Teak
• Base: Water-based
• Sizes: 0.25L, 0.75L, 2.5L
• VOC: Low

Compatibility and Accessories

• Suitable for exterior wood surfaces such as doors and windows
• Can be used on new or previously stained/varnished wood following proper preparation

Installation

• Ensure the wood surface is clean, dry, and free from old finishes or dust
• Sand the surface lightly with 120 grit sandpaper for better adhesion
• Clean the surface with white spirit and a cloth to remove dust and grease
• Stir the stain thoroughly before use

Apply the stain in the direction of the wood grain using a brush. Test on a small area first. Apply three coats for optimal protection, allowing four hours between coats. Lightly sand between coats for a smoother finish. Wait 12 hours after the final coat for complete drying and rainproofing.

Usage

• Apply on clean, dry, and properly prepared wood surfaces
• Apply in dry weather above 10°C for best results
• Use a brush to apply the stain evenly in the direction of the grain
• Allow each coat to dry for four hours before applying the next
• For the best finish, lightly sand the surface before the third coat
• Wait 12 hours after the final coat for complete drying

Other Information

• Clean brushes and tools with warm, soapy water after use
• In case of accidental staining on skin, wash with warm, soapy water
• Proper surface preparation and application ensure maximum durability and appearance