Rose Arch Garden Arbor Steel Garden Decoration vidaXL

…and what’s more I

To mount it, it was necessary to make some threads, moreover certain "crosspieces" are not straight. What's more, there are shocks on some places. On the other hand, here it is very windy, the sardines provided are not strong enough, so I reinforced the structure with "guys". Apart from that, the set is nice, once my plants have covered it well, I will have shade on my terrace, great.

Two parcels arrived together, well packed and carefully delivered by Brt. Essential but clear instructions. Assembly: 1. The hardware supplied is of a very basic quality, with non-locking nuts that will have to be screwed back a thousand times during use. 2. The cover rods are not very stable (they are made up of two elements with a small joint click = they do not stay straight). 3. Likewise, the front and back lines (the two long sides) are not perfectly aligned, they too consist of two pieces to be joined with screws and a small internal and external connection. Overall, the pergola is beautiful, but light. This is why I would have liked to lean it to fix at least the rear poles to the wall, and perhaps some points of the rear frame, but the assembly obligation due to the position of the screws of the cover rods prevented me: the rods protrude in front and behind by 25 centimeters. So I had to shorten them, make new holes for the screws. As a result, the width of the pergola is no longer the same. The quality / price ratio is however acceptable.

The pergola has a beautiful design Assembly is easy despite the lack of instructions. However the quality is really poor. The metal twists just by fully tightening the screws. And the feet must be strengthened so that they do not move with the wind. The price is relatively high for the quality.

There is nothing to say about the speed of delivery. But the quality of the product leaves something to be desired. Supposedly freestanding, this arbor is impossible to be set square. Connections between parts are approximate and not adjusted. Not all legs are aligned or twisted after assembly. And for one of the feet, the weld of the insert for the connection of the tubes was even released. For others it is just a matter of time. I doubt that the arbor will be able to withstand the slightest gust of wind. Product to avoid.

The assembly instructions are not very precise regarding the assembly order and should advise that once the front legs are attached to the front piece, they should be lifted and rested following the rear legs attached to the back piece. Only then will the two need to be joined by the side pieces (2 people needed for this). The side brackets fold and create easily where the bolts are from the weight if they are mounted on the legs before attempting to lift the assembly into place as we found. I was able to fix it by using washers to support the weakened corner brackets.