Sdre-RSC2 433MHz Remote Control for Ecostar RSC2 and RSE2 Gates, Compatible with 433MHz Rolling Code Models, ECOSTAR RSC2, RSE2 RSZ1 Garage Door Remote Control (2-Pack), by DEBUNS

Sdre-RSC2 433MHz Remote Control for Ecostar RSC2, RSE2 Gates. Compatible with 433MHz Rolling Code ECOSTAR RSC2, RSE2, and RSZ1 Garage Door Remote Controls (2-Pack)

433MHz Rolling Code Garage Door Remote Control Replacement for 433MHz ECOSTAR 433.92MHz 4-Channel Remote Control - It is only compatible (not a clone) with the same function as the original remote control.

The ECOSTAR RSE 2 transmitter is compatible with the following models: Ecostar RSC2, Ecostar RSE2, Ecostar RSZ1.

You must have access to the motor's control unit and use the motor's instruction manual to add it to the receiver's memory. radio.

STANDARD PROGRAMMING: 1 - Press the transparent programming button located under the ECOSTAR motor for 1 second. The small indicator light on the motor will flash slowly. 2 - Press button (A, B, C, or D) on your new remote control for 2 seconds. The indicator light on the motor will flash more rapidly. 3 - Press the same button on your new remote control for 2 seconds. The indicator light on the motor will flash very rapidly and then turn off. Your new remote control is programmed.