Sealey HCPS25 Hole Cutter Punch Screw 25mm

Sealey Hole Cutter Punch Screw 25mm

Features:

Hole Cutter Punch Screw is ideal for thin layered materials up to 4.0mm. They can deliver a smooth clean circular hole cut into the surface material giving a burr-free smooth circular hole. Suitable for Sheet Steel, Stainless Steel Sheets, Non-Ferrous Metals, Light Metals and Plastics. Used in the plumbing industry for sinks to produce a plug hole or to allow a tap/other fitting to be installed. Also used by electricians, construction and handicrafts.

Technical Details:

• High quality steel cutting and bracing edges.
• Clever design results in a burr-free hole by evenly spreading pressure during cutting.
• Once pilot hole is drilled and cutter is attached, use a spanner to turn the cutter and thread will apply the required pressure.
• Accurate cutting, ideal for cutting sinks for tap and drain fitting.
• No extra finishing needed, due to clean cutting.
• Model No. HCPS25

 • Model No. HCPS25

Additional Information:

• DURABLE - High quality steel cutting and bracing edges.
• CLEAN CUTTING - Clever design results in a burr-free hole by evenly spreading pressure during cutting.
• SIMPLE TO USE - Once pilot hole is drilled and cutter is attached, use a spanner to turn the cutter and thread will apply the required pressure.
• PRECISE - Accurate cutting, ideal for cutting sinks for tap and drain fitting.
• TIME-SAVING - No extra finishing needed, due to clean cutting.