1/5
Solar power controller, 150W 10-12V synchronous rectification MPPT solar controller for light
Of which environmental contribution £0.01 including VAT.
Buying for your business?
Negotiated prices excl. VAT up to -20%
Sold by MICHH-GB
You may also like
Compare with similar items
Product information
Description
1. Battery Charging: This MPPT solar controller maximizes the conversion of energy from the solar panel into battery charging. 2. Synchronous Rectification: This solar charge controller adopts a highly efficient synchronous rectification circuit structure. 3. Anti-Return: This solar power controller has an anti-return function. When there is sunlight, the controller charges the battery normally. When there is no sunlight, the controller can effectively prevent the battery from flowing back. 4. Multiple Protections: This MPPT solar controller supports short-circuit protection, overheat protection, solar input undervoltage protection, battery undervoltage protection, and charging port short-circuit protection. 5. Wide Application: This MPPT solar controller is widely used in solar street light controllers, solar chargers, solar electric bicycles, solar electric tricycles, solar toy cars, home solar panels, solar monitoring, etc.
Specification:
Item Type: MPPT solar controller. Material: Plastic. Normally open: 24 hours of charging output. Efficiency: ≥95%. Noise: <55dB. Application: Solar street light controller, solar charger, solar electric bicycle, solar electric tricycle, solar toy car, home solar panels, solar monitoring, and other application scenarios.
Suitable for Photovoltaic Panel Specification: Open Circuit Voltage: 21 to 25V Charger Module: Photovoltaic Input Power: 150W PV Input Start Voltage: >17V PV Input Tracking Voltage: 16 to 25V Output Current to Battery: 10A (maximum 12A) No Load Loss: 20mA Adjusted Voltage Rate: 1% Adjusted No Load Rate: 5% Full Load Ripple: 400mV No Load Ripple: 100mV Discharge Module: Input Voltage: equal to battery voltage Charge Output Voltage: equal to battery voltage Charge Output Current: 10A Static Power Consumption: 12mA Charge Output Mode: normally open Protection Module: Battery Short Circuit Protection: yes Charge Short Circuit Protection: yes Thermal Protection: yes Reverse Current Protection: yes Protection Level: IP67 Operating Temperature: less 40°C to +65°C Overheating protection: When the internal temperature of the MPPT controller exceeds 100°C, the MPPT controller will reduce the output power. If the internal temperature continues to rise to 110°C, the MPPT controller will automatically shut down the output. When the internal temperature of the MPPT controller is below 90°C, the MPPT controller will automatically resume operation. Package List: 1 x MPPT Solar Controller Note: The MPPT controller must be mounted on an iron or metal support to prevent machine vibration due to instability. The MPPT controller should have some clearance around its casing. The input and output wires should be as short as possible to avoid excessive power dissipation during transmission. The machine carries high voltage and current, and non-professionals should not attempt to disassemble it. The input and output terminals must be secure and not loose to prevent overheating at the connection point.Features
- BrandOTHERS
- IP ratingIP67
- MaterialPlastic
- Type of solar charge controllerMPPT
- ManoMano ReferenceME223237948
- MMID267560987922
- Product codeKrlin-33120
'/%3E%3C/svg%3E)
You are here:
'/%3E%3C/svg%3E){kind=small}