Tent stove outlet kit, high-temperature silicone hose sleeve, roof duct flashing, compatible with triple-wall sections, black

1. Product size: suitable for pipes with an outside diameter between 4.5 cm and 10 cm. If over 4.5 cm, you will need to cut your own rings. Please confirm the size of the chimney pipe base before purchasing.

2. High Temperature Resistant: The tent flue flashing kit is made of heat-resistant silicone and stainless steel. Maximum tolerance 280℃. The silicone has good temperature resistance and is flexible, allowing for the expansion, contraction, and vibration of the pipeline, making it less prone to damage or deformation.

3. Protect Your Tent: The tent stove flashing kit is ideal for use with 3 wall pipe sections to prevent hot chimney pipes from directly contacting your tent or shelter and provides a watertight seal around the chimney pipe at the outlet point, thus protecting the tent.

4. Easy to Install: First, cut the correct size with scissors, then cut the corresponding chimney pipe, and finally unscrew the screws and...

5. Wide Application: The thick folds and stainless steel rings at the bottom allow it to fit any roof pitch or metal profile. This tent stove flashing is suitable for multiple occasions and can be used with bell tents, tents, yurts, cabins, sheds, boats, houseboats, summer homes, workshops, garages, and anything requiring a flue outlet. 405.00 g / 14.29 oz

Heat Resistance Temperature: 280°C

Fits Chimney: 4.5 to 10 cm / 1.8 to 3.9 inches (rings may need to be trimmed if larger than 4.5 cm)

Product Diameter: 16 cm / 6.3 inches

How to Use:

Step 1: Opening the Tent Chimney Hole: Determine the location of the chimney hole on the tent. Mark the screw positions on the circular steel piece of the chimney hole and drill holes accordingly.

Step 2: Cut two pieces of wear-resistant material the same shape as the circular steel piece, using the circular steel piece of the silicone sleeve as a template (heavy fabric can also be used as a substitute). This step is optional, but adding wear-resistant material can better protect the tent from wear.

Step 3: Place the cut wear-resistant material and the steel piece inside the tent opening, inserting the screws from the inside out.

Step 4: Place the wear-resistant material, silicone sleeve, and steel piece from the outside, Tighten the screws with nuts to secure them.

Step 5: Cut the tent fabric inside the silicone rings to complete the opening.

Step 6: After installation, insert the chimney for immediate use. If the chimney diameter is greater than 4.5 cm, you can trim the silicone rings accordingly.

Package List:

1 x Tent Stove Flashing

1 x Wrench