Tester of sensor of moisture of the floor to effect of tighten waterproof of output 0-10 V

1. The sensor of moisture of the floor suitable for the measured of the moisture and of the moisture of the floor, which has a high precision, a response fast and a output stable.

2. It is less affect by the content in sel of the floor and suitable for all the types of floor.

3. It can be enfoui in the floor during a long period, resistant to l'electrolyse for the long term, to the corrosion resistance, at the filling under empty and to the sealing, completely waterproof.

4. Uses a output analogique, can choose the type of current of output or the type of voltage, the cblage can be a system to three wires.

5. It is widely used in the experience scientifiques, the irrigation energy-efficient in water, the tighten, the flowers and the vegetables, the pturages of prairie, the measured fast of the floor, the culture of plants, the processing of water worn, the storage of cereales and the measured of the content in moisture and of the temperature of various particles.

Specification:

condition : 100% brand new

Item Type: sensor of moisture of the floor.

Material: ABS + stainless steel 316

Power supply: 12-24VCC

Range of measured of the moisture: 0-100%

Signal of output: 0-10V

Precision of the water: ±3% (0-53%), ±5% (53-100%)

Installation : All embarque or all probe inserted in the middle measured

Time of response: Degree of protection: IP68

Consumption electric: ≤ 0.15W (@ 12V DC, 25 ?)

Range of pressure of travail : 0,9-1,1 atm

Length : approx. 13,8 cm / 5,4 inches

paisseur : approx. 1,5 cm/ 0,6 inches

Weight: approx. 197g / 7oz

Package List: 1 x sensor of moisture of the floor1instruction

Note:

Please allow a error of 1 to 3 cm due to the measured manual. Thank you for your understanding.