Thermostatic mixing valve with integrated high-performance brass valve, scald protection, suitable for solar water heaters, etc. (DN20 male thread - 3/4" male thread - 3-way male thread)

General Description

High-performance, high-flow thermostatic mixing valve, suitable for domestic hot water, with or without underfloor heating. The integrated temperature control provides scald protection, ensuring the safety of the whole family. It is designed for domestic hot water preparation and for underfloor heating systems and meets the requirements for constant temperature and uniform flow.

Technical Data

• Dimensions: 10 x 7 cm
• Weight: 467 g
• Material: Brass, Plastic
• Connection: DN20
• Maximum operating pressure: 1 MPa
• Cold water temperature: 0–29 °C
• Hot water temperature: 40–90 °C
• Temperature range: 35–60 °C

Compatibility and Accessories

• Compatible with domestic hot water heaters
• Can be used with underfloor heating circuits

Installation

Follow the enclosed instructions for installing the mixer. For proper operation of the mixer, please follow the enclosed instructions. Ensure sufficient hot water pressure for optimal performance. Application: The thermostatic mixer regulates the water temperature by adjusting the mixing ratio of hot and cold water to ensure a constant temperature. If the cold water supply is interrupted, the safety device automatically shuts off the hot water supply, thus preventing scalding. Further Information: This mixer is designed to provide stable performance even with fluctuations in water temperature and pressure. The outlet temperature can theoretically vary between 1 and 99 degrees Celsius, depending on the characteristics of the water source.