TTulpe® C-Meister 13 P50 Eco ErP/low NOx room sealed gas water heater, propane/butane gas 50 mbar

Description:

The new TTulpe® C-Meister 13 P50 Eco is the successor to the popular C-Meister 12 P50. Designed for indoor installation, this water heater has a capacity of 13 liters per minute. The C-Meister is a closed modulating constant temperature water heater without a pilot light.

Environmental Friendliness and Safety:

TTulpe prioritizes environmental considerations; their water heaters contain no hazardous materials and comply with the RoHS 2 Directive (EU) 2015/863 and the Ecodesign Directive 2009/125/EC. These models have the lowest NOx emissions on the market. The self-modulating flow sensor technology adjusts the amount of energy needed to heat the water, resulting in significant energy savings.

The C-Meister 13 P50 Eco is a fully closed gas water heater, the safest on the market. Fresh air is drawn from outside, and combustion gases are expelled outside, allowing installation in bathrooms without restrictions throughout the EU. The temperature is controlled by thermostats, and automatic safety controls ensure safe and efficient operation.

Ease of Use and Installation:

Equipped with a digital display and simple touch-button controls, the temperature can be easily set. This water heater is suitable for replacing old boilers or as a new hot water supply in boats, caravans, tiny houses, apartments, or holiday homes.

Note: The 50 mbar water heaters (P50) are primarily used in German-speaking countries. For use in other countries, a 50 mbar gas pressure regulator is required, available on our website.

Technical Specifications:

• Gas Type: Propane, butane, or LPG
• Gas Pressure: 50 mbar
• Power Output: 26 kW
• Nominal Output Power: 22.5 kW
• Connection: 220-240 Volt
• Max. Power Consumption: 52 Watts
• Frost Protection: No
• Dimensions: 350 x 640 x 185 mm (w x h x d)
• Minimum Water Pressure: 0.5 Bar
• Maximum Water Pressure: 8 Bar
• Water Flow Rate: between 3 and 13 liters per minute
• Temperature Range: 30 to 65 degrees Celsius
• Flue Gas Connection: 60/100 mm
• Net Weight: 12 kg
• Cord with Plug Included
• Energy Class: A
• Domestic Hot Water Quantity: M (comparable to CW4)
• Electric Frost Protection System: No
• Water and Gas Connections: 1/2 inch

Included in Delivery:

• Two stainless steel water hoses (one with shut-off valve)
• Gas connection adapter with solder connection
• Teflon tape
• Mounting material

Warranty:

• 2 years

The TTulpe® C-Meister 13 P50 Eco is a reliable and efficient solution for your hot water needs, featuring an environmentally friendly design and the highest safety standards.