Two-piece female thread ball valve in 304 stainless steel, 2" DN50 1000 WOG

Features: 1. With a simple structure, small volume, and light weight, convenient for maintenance. 2. Easy operation: quick opening and closing by turning the handle 90 degrees. 3. The sealing surface between the ball and the valve is isolated from the fluid so that the passing fluid does not cause erosion. 4. The direction of fluid flow is not limited by the installation orientation. 5. Good sealing performance and low fluid resistance. Specifications: This two-part ball valve is mainly used in pipelines to control and regulate fluid flow, and is suitable for water, oil, and non-flammable gas. Features: 1. With a simple structure, small volume, and light weight, convenient for maintenance. 2. Easy operation: quick opening and closing by turning the handle 90 degrees. 3. The sealing surface between the ball and the valve is isolated from the medium so that the passing fluid does not cause erosion. 4. The direction of fluid flow is not limited by the installation orientation. 5. Good sealing performance and low fluid resistance. 6. Widely used to control and regulate the flow of fluids such as water, oil, and non-flammable gases. Specification: Material: 304 Stainless Steel Thread: 2"DN50 Working Pressure: 1000 psi (WOG) Operating Temperature: -20 ~ 200℃ Length: 10.5cm / 4.1in Hole Diameter: 6.8cm / 2.7in Package Weight: Approx. 1062g / 37.4oz Package List: 1 * Ball Valve Note: Please allow slight error due to manual measurement. Thank you for your understanding.