Ulisem 2-piece ceramic disc head, 1/2" ceramic cartridges, universal replacement for brass tap, 20 steps x 53 mm, for kitchen and bathroom (hot and cold)

General Description

The ceramic tap head is made of solid brass and high-quality ceramic, ensuring strength and durability. It is suitable for extended use, offering optimal performance.

Technical Specifications Dimensions: Length: 53 mm Outer diameter: 7.6 mm Inner diameter: 4 mm 20 teeth on the top of the valve Compatibility and Accessories Universal size, compatible with 75% of taps Suitable for use with single or double hot and cold water taps Included: 2 taps (1 blue and 1 red) and 2 x 4 mm screws Installation

Installation is simple thanks to the included tools: 1 Allen key, 1 screwdriver, and 1 wrench.

It is easy to turn the tap head without leakage.

Usage

To open or close the tap, turn clockwise or counterclockwise.

Before ordering, check compatibility with your model by considering the following:

Ensure the handle has 20 teeth on the spline (at the top of the stem). Compare the diameter of the threaded head (7.6 mm). Check if there is a threaded ring. Confirm that the thread size is G 1/2 BSP. Check the tap height. Ensure the opening direction is correct. Other information

Measurements are taken manually; a margin of error of 1 to 3 cm is possible. The actual color may differ slightly from the one shown due to lighting and display settings.