Ultrasonic Waterproof Infrared Light Solar Flashing Animal Repeller

Technical data:
Power supply: 5V, 0.1W amorphous silicon solar panel
Battery: 800mAh rechargeable battery
Battery material: Ni-MH charging for 6 ~ 8 hours (condition continuous working)
Effective distance: 6-8M (depending on weather and environment)
Detection angle: 110 �� horizontal (depending on surrounding weather)
Index Waterproof: IPX4
Certificate: CE and ROHS

Features:
It adopts the principle of infrared sensing, the infrared LED light is on and the ultrasonic horn is will operate at the frequency of 13.5 kHz to 20 kHz in the first operating state; intelligent detection, work by itself when there are animals, reduce power consumption and prolong working time The frequency is swept to reduce the adaptability of animals.

Adjust the frequency knob on the left side of the panel clockwise, and the device working mode will change to:
1: 13.5kHz - 20kHz , which can repel mice, dogs, foxes, minks, etc.
2: 15.5kHz - 25kHz, which can repel cats, raccoons, badgers, skunks, etc.
3: 25kHz - 34.5kHz, which can repel bats, birds, rodents, etc.
4: White LED light flashes to expel raccoons, wild boars, minks, etc.
5: 13.5kHz - 40kHz, and the white LED flashing function is activated, which can expel all the animals listed above.
Adjust the knob of sensitivity on the right side of the panel clockwise, the detection sensitivity of the device will gradually increase, that is, the detection distance will gradually become more long.

It can be installed anywhere in your home, garden, orchard, field or yard. This product uses solar concentrators and rechargeable batteries, which can save energy and protect the environment.

This product only repels animals without harmful chemicals and will not pollute not the environment. It only emits ultrasonic waves of frequency 13.5kHz to 40kHz to ward them off. Ultrasound is not within the range of human hearing and will not cause noise pollution. What's more, the ultrasonic wave attenuation will not cause any harm to human body, nor harm animals, so it can protect animal species.

Description of product function:
1) Loudspeaker: This product can emit high frequency ultrasonic waves to drive away animals.
2) PIR motion detector: This is a #39;a pyroelectric infrared sensor, when a moving animal is within the detection range, it detects it and at the same time gives a signal to the processor, lets the device start working, sends the frequency of the sound wave to lead the animal and white LED light also flashes. 3) Red LED light: The red LED light is on when the animal is detected to indicate the animal. equipment working status. 4) White LED flashing light: When the pet is detected, the white LED flashing light starts to work, flashing 3 times each time, the pet is detected. The flashing interval is 1.5 seconds and the cycle continues until the animal leaves the protected area for 15 seconds, the device stops working and enters standby. br/> 5) Strong flashing white LED has better effect on some animals such as birds, mice and cats.