Underground cable locator, circuit tracer, metal pipe detector, cable tracing tool, can detect cables in underground walls

General Description

The cable locator, comprising a transmitter and receiver with integrated batteries, is an essential tool for locating cables buried in walls and underground. It allows you to trace electrical cable routes and detect short circuits and other cable faults.   Designed for ease of use, this set is ideal for identifying concealed fuses, protective circuits, sockets, and junction boxes. Both the transmitter and receiver use rechargeable lithium-ion batteries, offering convenience and extended operation.

Features

• Accurate Detection: Locates electrical cables concealed in walls and underground, detects short circuits and other faults.
• Component Identification: Allows you to find concealed fuses, protective circuits, sockets, and junction boxes.
• Rechargeable Batteries: Transmitter and receiver equipped with rechargeable 3.7V 1500mAh lithium-ion batteries, convenient and self-contained.
• Versatile: Can be used for cable location in various detection situations.

Specifications

• Transmitter:
  • Output Frequency: 125kHz
  • Signal Encoding: A, B, E, F, H
  • Signal Levels: 4
  • External Voltage Detection: DC 10-400V (0-60Hz) ±2%, AC 10-400V (50-400Hz) ±2%
  • External Polarity Check: Yes
  • External Voltage Detection: 400V DC/AC for cable location
  • Power Supply: 3.7V 1500mAh Lithium-Ion Battery (Built-in)
  • Fuse: 2A/500V
  • Dimensions: 175*85*36mm
• Receiver:
  • Tracking Depth: Depends on the environment and application
  • Cable Locator (NCV): Approximately 0-2 meters (single-pole use), approximately 0-0.5 meters (double-pole use)
  • DC Voltage Detection: Approximately 0.4 meters
  • Display: Signal coding, signal level, signal strength
  • Power Supply: 3.7V 1500mAh lithium-ion battery (integrated)
  • Operating Temperature Range: 0-40°C, maximum 80% relative humidity (non-condensing)
  • Storage Temperature Range: -20-60°C, maximum 80% relative humidity (non-condensing)
  • Dimensions: 255*85*36mm

Package List

• 1 * Receiver
• 1 * Transmitter
• 1 * Antenna
• 2 * Rigid Test Leads
• 2 * Alligator Clips
• 1 * Charging Cable
• 1 * Floor Ladder
• 1 * Tool Bag

Usage

1. Charging: Before first use, charge the transmitter and receiver using the supplied charging cable.
2. Transmitter Setup: Connect the transmitter to the cable or circuit to be detected using the rigid test leads and alligator clips.Configure the transmitter settings (frequency, signal coding, etc.) according to the instructions in the manual.
3. Receiver Operation: Turn on the receiver and point it towards the area where the cable is suspected to be located.Follow the on-screen instructions (signal coding, signal level, signal strength) to locate the cable.
4. Detection: Move with the receiver to trace the cable path, locate faults, or identify hidden components.Use the floor ladder if necessary for ground positioning.
5. Shutdown: After use, turn off the transmitter and receiver and store them in the tool bag.

Instructions

• Safety: Always check that the circuit is disconnected or that the voltage is low before connecting the transmitter. Observe electrical safety precautions.
• Regular Charging: Recharge the transmitter and receiver when the battery is low to ensure good performance.
• Maintenance: Clean the alligator clips and test leads regularly to maintain a good connection. Store the accessories in the provided tool bag.
• User Manual: Carefully consult the user manual for all detailed instructions and precautions specific to each function.
• Environment: Observe the temperature and humidity ranges for operation and storage of the device.