Universal tool to activate and re-learn the TPMS automotive tire pressure sensor

1. The tire pressure sensor on models from 2012 can only be read with specific diagnostic components.
2. To ensure that the tire pressure monitoring system functions correctly, the vehicle control module will provide information identifying each position in the tire pressure sensor.
3. This can facilitate the reprogramming of all tires in just 3 steps.
4. Activation of the tire pressure monitor sensor is simple, quick and easy to use.
5. Its compact design is lightweight and portable, easy to transport.

Specifications:

Condition: 100% new
Type of item: It fits to restore tire pressure.
Color: As shown in the image
Battery: 9 battery numbers (not included)
Hardware version: OEC-T5
Software version: EL-50448
Voltage: 9 V
Compatibility:
Apto para vehículos universales
Application procedure:
Paso 1: Access al Tilt mode
Turn the switch lever to "P"
Turn the ignition switch to "ON"
Access the tire pressure display interface through the DIC
The DIC shows "Pressure Set/Ctrl for recovery"
Press "Set/Ctrl"
The speed signal illuminates for 3 seconds and the battery starts to learn Mode
Pass 2: Read the information from the tire pressure sensor
Come on with the wheel switched off,
Suppress the antenna of the tire herramienta de diagnostic J-46079 or EL-50448 against the valve obús and around the side edge of the tire.
The EL-50448 tire pressure switch is started with the ignition switch. the tires when the boiler is turned on.
Step 3: The same method to read the tire pressure information
Signal the previous instructions to read the tire pressure of the wheels left behind, next and back izquierda.
The directional lights illuminate for 3 seconds and the boiler lasts for veces when the learning process is completed.

List of the package:

1 tires

Note:

The package does not include the charger or the battery.