VEVOR Milling Table 17.7×6.7Inch Compound Slide Milling Table 30KG Multifunction Worktable Cross Milling Machine Compound 2 Axis 4 Ways for All Drill Stands Bench Drilling Milling Machine

Very good generally, Iportant! The lateral sight lacks 60mm in length so 60mm of crosspiece movement is lost, PLUS no stop, the sight is dislocated and it is difficult to get back to full work. So table to repair and work piece to reposition, not great.

There is no secret. We cannot expect from a table at 150 Euros the quality of a table at 2000 Euros. The game catch-up pieces are common pieces of raw plate, not even polished, with traces of rust. May be correct for DIY after complete disassembly and a little work to try to improve it but for machining it is better to look for better quality.

The product seems to be of good value for money even if the deadline for requesting an opinion does not allow me to have really tested it! It seems robust and very rustic (which often goes hand in hand). Requires a check and adjustment of movement screw* and slide clearances before commissioning, and re-tapping of the handle screws. Too bad that the pin wrench to adjust the play of the stops is not provided. *these screws are directly exposed to shavings and other projections: a protective cover seems essential to me that I will have to make!

Average finish with play in the cranks, it's a shame not to have the adjustment keys supplied with it

The finish is rather basic; the shafts creak in their housings, the bearings are simple pressed cages, the joysticks have significant axial play, and the wheel markings are inaccurate, but the table movements are still acceptable. Not recommended for precise metalworking, but suitable for milling wood with more than sufficient precision for woodworking.

Good product for DIY projects. Not for a professional.