Wireless weather station with black and white screen, no Wi-Fi. Measures wind speed in multiple units, LCD screen.

Features: * Displays indoor and outdoor temperature in Fahrenheit or Celsius (user selectable). Indoor and outdoor high/low temperature alarm settings are available. * Displays indoor and outdoor relative humidity. Indoor and outdoor high/low humidity alarm settings are available. * Wind speed in mph, km/h, m/s, knots, and ft. Displays average wind speed and gusts. * High wind speed alarm setting: * Users can adjust the high wind speed alarm setting in this mode. Press [SET/HISTORY] to enable or disable the high wind speed alarm. Press [+] to increase the high wind speed alarm value, and press [-] to decrease it. Press [+] to quickly increase the alarm value, and press [-] to quickly decrease it. * Wind direction display (N, S, W, E, NE, SE, SW, NW) with LCD screen. Wind direction alarm setting: * Users can set the wind direction in this mode. Press [SET/HISTORY] to enable or disable the wind direction alarm. Press [+] or [-] to adjust the alarm wind direction. * Displays wind chill and dew point temperature in Fahrenheit or Celsius (user selectable). * Weather alarm modes for temperature. * Daylight Saving Time is automatically adjusted (daylight saving time is adjusted according to different time zones). * 12-hour or 24-hour time display. 433 MHz wireless reception. Available range: 100 m in open field. When receiving RF, press any key to exit. * Perpetual calendar. * Time zone and time alarm setting. The time zone can be set from 12 to +12 (user settings). * Can be wall-mounted or placed on a surface. * Instant synchronized reception of outdoor weather data. * Low battery indicator on the receiver. * The remote pressure gauge sensor can be mounted in two different ways: horizontally and vertically/vertically. * Press the "HISTORY" button once to display the maximum temperature, humidity, and wind speed. Press it again to display the minimum readings. Press it again to return to the current readings. When the minimum or maximum reading is displayed, press and hold to clear the minimum or maximum memory. Additionally, the time of recorded data can also be displayed. *Historical Recording Mode *In normal display mode, press [SET/HISTORY] to enter historical recording mode. In this mode, users can check historical data records for the past 20 hours. Press [+] to view the next historical data record, and press [-] to view the previous historical data record. In normal display mode, press and hold the [MODE] and [SET/HISTORY] buttons together for 3 seconds to enter factory reset mode. In factory reset mode, the accuracy of the indoor/outdoor temperature, indoor/outdoor humidity, and atmospheric pressure sensors can be adjusted. * The weather alarm can be set separately; any value can be set. The alarm signal lasts for 2 minutes. Specifications: Indoor temperature: 0°C to 50°C. Outdoor temperature range: Alkaline batteries: -20°C to 60°C. Lithium batteries: -40°C to 60°C. Temperature accuracy: ±1.0°C. Humidity range: 20% to 90%. Humidity accuracy: ±5%. Wind direction: E, S, W, N, SE, NE, SW, NW. Wind direction accuracy: +/-10°. Wind speed: 0 ~ 50 m/s, accuracy: 0.1 m/s. Wind speed units: m/s, km/h, mph, knots. Receiver: Alkaline battery: 2 x 1.5V AAA batteries (not included). Remote pressure gauge sensor: Alkaline battery: 2 x 1.5V AA batteries or AA lithium battery (not included). Battery life: Approximately 12 months. Station dimensions: 52.1 cm H x 22.9 cm D. Receiver dimensions: 12.4 cm H x 6.9 cm D. Screen dimensions: 6 cm high x 4.5 cm wide. Contents: 1 receiver, 1 sensor, 1 installation accessory kit. Note: 1. Due to differences in lighting and screen settings, the product color may vary slightly from the image. 2. Please allow for a 1-3 cm difference due to manual measurement. 3. Please confirm the size is suitable for your needs before purchasing.