1/5
XH M604 Battery Charge Control Module DC 6-60V Protection Board for Automatic Charging Shutdown
Of which environmental contribution £0.10 including VAT.
Buying for your business?
Negotiated prices excl. VAT up to -20%
Sold by Cuizi
You may also like
Compare with similar items
Product information
Description
1. This product is suitable for controlling the discharge of 6-60V batteries and can configure the discharge voltage modes and stop the discharge voltage. 2. Suitable for use in home chargers, solar power systems, and wind turbines. 3. Connect the 6-60V charger to the IN end and the storage battery to the OUT end. 4. It is quite intelligent, helps save electricity, and is safe. 5. Automatic power cutoff saves energy and extends battery life. Specification: Features: This product is suitable for controlling the discharge of 6-60V batteries and can configure the discharge voltage modes and stop the discharge voltage. Suitable for use in home chargers, solar power systems, and wind turbines. The charger inputs 6-60V to the IN end, and connects the storage battery to the OUT end. For example, by setting the start voltage to 12V and the stop voltage to 15V, when the voltage is below 12V, the relay closes and sends the charger's discharge voltage to the battery. When the voltage is above 15V, the relay disconnects and stops charging and discharging. It is quite intelligent, helping to save electricity and power. Automatic power cutoff saves energy and extends battery life. Specifications: Input Voltage: 6-60VDC. Display accuracy: 0.1V Control accuracy: 0.1V Output type: Direct output Voltage error: +/-0.1V Application: 6-60V storage battery Size: 81*54*24mm/3.19*2.13*0.94 inches How to use: When setting the voltage value, the start button moves the adjustment action upwards, the stop button moves the adjustment action downwards. 1. Setting the starting voltage: In normal voltage display mode, press the button to display the charging starting voltage; press and hold for 3 seconds, the digital tube will flash; you can then use the start or stop button to set the charging starting voltage value. 2. Adjusting the cut-off voltage: In normal display voltage mode, press the button to display the cut-off voltage; press and hold the button for 3 seconds, the digital display will flash; you can then use the start/stop button to set the cut-off voltage value. 3. Factory reset: In powered-on mode, press the start/stop button simultaneously; the digital display will show 888, which represents the factory reset parameters. Package includes: 1 battery charge control module.
Features
- BrandOTHERS
- MaterialPlaster
- ManoMano ReferenceME249577974
- MMID848823993447
- Product codeBT-UK2025YS-140047
- EAN3798311430902
'/%3E%3C/svg%3E)
You are here:
'/%3E%3C/svg%3E){kind=small}