A gutter? Not complicated to make, just assemble the pipes together! But be careful, do not be mistaken, a gutter is a more complex conduit than it seems… If I tell you: gutter birth, end cap, gutter junction... Does that mean anything to you? No? Then refer to the bottom of the page, we will try to shed some light on gutter connections.
The gutter is an essential element for your house as it channels rainwater from the roof and thus protects the facade from water infiltration and other humidity-related damages.
The gutter consists of horizontal profiles and the vertical downspout. To assemble these different elements, you need to use gutter connections. These play a crucial role: they ensure the tightness of the gutter. Therefore, your connections must necessarily be made of the same material as your horizontal profiles and your vertical downspout. Ideally, all elements should be from the same brand and, if possible, from the same range to ensure optimal impermeability.
Here is a glossary of the main types of connections (find them on our website at the best price!).
The junction (profile/profile connection) allows the profiles to be assembled, which should not be too long to avoid gutter sagging.
The birth, which can be central or fixed at the ends, serves to connect the profile with the gutter downspout.
The end cap (or birth end) is fixed to the ends of the profile to close the gutter.
The elbow, in turn, allows the downspout to be adjusted to the wall by bypassing the fascia board.
Remember to add a rainwater collector to the downspout, which you will connect to a tank. You will then be able to recycle rainwater to water your garden, wash your car... and make great savings.
Be smart with your DIY!
![[NEVER USED] Galvanized gutter guard, 50mm-70mm-- (1/4)](https://cdn.manomano.com/pim-media/images/medium/f60be45d02b7ea7aad9222b073d9537ac54a4658.jpg)
'/%3E%3C/svg%3E)
'/%3E%3C/svg%3E){kind=small}