20A 300W MPPT Solar Charge Controller Buck Synchronous Rectifier Photovoltaic Battery Charger 24 Hours Charging Output for Street Light Controllers (13.8V Normally Open)

1. Special Technology: The MPPT controller uses solar Maximum Power Point Tracking (MPPT) technology, ensuring reliable and stable performance.
2. High Efficiency: The 300W 20A MPPT solar charge controller adopts a high-efficiency synchronous rectifier circuit structure.
3. Multiple Protections: Short-circuit protection, overheat protection, solar input undervoltage protection, battery undervoltage protection, and charging port short-circuit protection.
4. Scope of Application: Solar street light controllers, solar chargers, solar electric bicycles, solar electric tricycles, solar miniature cars, home solar panels, solar monitoring, and other usage scenarios.
5. Good Performance: The product size is 74 x 74 x 32 mm. Charge discharge current 20A, output power 300W, normally open is a 24-hour charging output.

Specification:

Item Type: MPPT solar controller.
Material: Plastic
Gross Weight: 306g / 10.8oz
Product Size: 74 x 74 x 32 mm / 2.9 x 2.9 x 1.3 inches
Charge Discharge Current: 20A
Output Power: 300W
Normally Open: 24-hour charging output
Efficiency: ≥95%
Noise: Application: Solar street light controllers, solar chargers, solar electric bicycles, solar electric tricycles, small solar cars, home solar panels, solar monitoring, and others Usage scenarios.
No charge loss: 30mA
Voltage regulation rate: 1%
Load regulation: 5%
Full load ripple: 400mV
No load ripple: 100mV
Discharge module input voltage: equal to battery voltage
Charge output voltage: equal to battery voltage
Charge output current: 30A (max. 32A)
Static power consumption: 12mA
Charge output mode: photosensitive
Battery terminal short-circuit protection: yes
Charge short-circuit protection: yes
Thermal protection: yes
Protection class: IP67
Operating temperature: -40?-+65?18:23

Package List:

1 x Controller

Note:

The MPPT controller must be mounted on an iron or metal support to prevent machine vibration due to instability. The MPPT controller should have some clearance around its casing. The input and output wires should be as short as possible to avoid excessive power dissipation during transmission. There is high voltage and high current in the machine, and non-professionals are not permitted to disassemble it. The input and output terminals must be secure and not loose to prevent overheating at the connection point.