3-in-1 Wall Detector, Material Scanner, Metal Studs and Beams, Structure Sensor

This store is perfect for you!

Product Name: Solar Fountain

Product Introduction:

This brushless solar water pump uses high-sensitivity, low-power Hall effect elements, coupled with an efficient and intelligent electronic circuit. It adopts a fluid mechanics volute design for the turbine cavity to reduce water flow resistance, resulting in overall performance superior to traditional structured solar water pumps. The efficiency of this structured solar water pump is increased by 20%. It also addresses the shortcomings of current brushless solar water pumps, which are difficult to start, have low efficiency, and poor stability.

Solar Panel Specifications:

Rated Voltage: 7V

Rated Power: 1.4W

Material: Monocrystalline silicon, epoxy resin panel

Water Pump Specifications:

Operating Voltage: DC 7V

Working Current: 160mA

Maximum Head: 100cm

Maximum Flow Rate: 180L/H

Pump Lifespan: >20,000 hours

Water Pump Noise: <45dB

Inner Box Size: 168 * 168 * 43mm

Weight: 220g

Water spray height: 30 to 60 cm. The spray height will vary depending on the nozzle used. When the solar panel receives sufficient sunlight, the water pump starts within 3 seconds.

How to use:

1) Assemble the product according to the schematic diagram.

2) Place the solar panel in a suitable location, ensuring it is not obstructed by other objects. When the solar panel receives sufficient sunlight, the water pump will operate normally.

3) When the pump is first placed in water, there may be air inside, which could affect the spraying effect.

Quantity supplied: 1 * pc

Shop Tips:

1. The size is measured manually, please allow for an error of 1-3 cm.

2. Due to different monitor pixels, there may be a color difference; please refer to the actual product.