35mm Hinge Jig, Door Cabinet Hinge Jig, Concealed Hinge Jig, Hole Puncher, Drill Guide Locator for DIY Woodworking

【How to install

1. Install a 35mm hole opener;

2. Adjust the drilling depth to 12~13mm, and then lock the limit ring;

3. Adjust the fixed size of the Black pressure block of the quick clamp (Note: The adjustable fixed board size of the tool is 15-25mm);

4. Move the puncher to the marking and drilling position of the board and lock the quick clamp;

5. Tighten the drill handle, press the hole to a depth of 12-13mm at a constant speed;

6. Drill a 2mm screw hole on the left and right sides, and then install the 35mm hinge.

【Package Contents】

Hinge Drilling Locator Body * 1

35mm Hole Opener * 1

Limit Ring * 1

Limit Ring Fixed Screw * 1

Wrench * 2

2mm Drill Bit * 1

Hexagonal Bar Wrench * 1