4 in 1 Digital Construction Detector, Wall Detector with LCD Display, Electronic Stud Scanner Detect Metals/Electric Wires/Wooden Studs in Walls, Floors and Ceilings

High Precision Stud Finder: Advanced sensor technology can accurately and quickly locate metal wood AC line. It is used to detect the center position of metal or wood studs in the wall. In addition, it can detect the functions of metal and voltage in the wall, and whether the wires in the wall are live. Whether you are a professional or a DIY enthusiast, you can find great use in this digital stud scanner.4 in 1 Multi-Function Wall Detector: The digital wall scanner includes four different scanning modes for wood, beams, joists, metals, AC wires and deeply embedded objects. Deep scanning locates the center and edges of wood and metal studs up to 1.5 inches deep; Metal scanning detects metals up to 2.36 inches deep; AC scan detects unshielded live AC wires up to 2 inches deep.Easy-to-read LCD screen: The digital stud scanner has a large LCD screen with a loud warning sound to detect the precise location of objects. When you find material, the LCD shows the direction and the beep intensity tells you if you are closer to the target. Rapid detection saves users time and effort, making it easier to complete tasks.Automatic correction function: When the beep sound and the screen disappear, place the wooden beam finder on the wall, open the stud finder and complete the calibration. Automatic calibration before use provides users with maximum reliability and accuracy. Then put it on the wall. After picking up the edge of the stud, the wood beam sight will flash and beep. Safety Protection: The stud finder can quickly locate wood, metal and AC wires hidden in walls, floors and ceilings of homes. It can work on different wall surfaces, such as slats, wallpaper wooden floors, soundproof ceilings, whitewashed walls, etc. Helps you avoid dangers when installing TVs, cabinets, garage shelves, etc.Product DescriptionWhether you're hanging pictures, installing a new set of shelves, or preparing to start an addition, knowing where the studs are located in a wall can be extremely handy! And a good stud finder can be the difference between a successful DIY home project and a disaster. This is why a stud finder is important. This Stud Finder adopts the leveling sensors with high precision. It is the best choice for accurately and quickly locating AC studs/metals/wires! Electronic stud finders have changed everything. Electronic stud finders give you an incredibly accurate view of the wall and show you exactly where each stud is.1. High accuracy/reliability/consistency2. Identifies the width of the post as well as the location3. Easy-to-read screen and quick identifiers when you hit a tenon4.Increases sensitivity to over 2 inches5. Upgrade model with 4 scanning modes to meet different needsNote: 1. This stud finder can quickly locate metal, studs, joists, pipes, live AC wire behind all kinds of walls, floors and ceilings, but except cement board wall and brick wall, you can use it on popcorn ceilings, plaster walls, textured surfaces, drywall, etc.2. Please Note: 9v battery is not included in the Package Step 1: Calibrate the tool before each scan After choosing the mode, press and hold the scan button (on the side of the tool) to calibrate this tool.Wait until the reducer bars disappear and beep to confirm that the calibration is complete. In tenon/deep mode, place it on the wall where you want to detect it to calibrate it; In AC/Metal mode, put it in the air to calibrate it. Step 2: Scan the wall Hold the button, then slowly move the stud finder along the wall, if you accidentally shake or lift the scanner, the device needs to be recalibrated. The narrow on the screen with the sound signal changes, guides you to find the stud location. Step 3: Find the stud location When the signal bar is full and the beep sound is the loudest, it means you have found the center of an object. Mark it with your pencil.Sold by the Bianco FR store