4 in 1 Wall Metal Detector with LCD Display Stud Finder Detector with 9V Battery Yellow

【4 in 1 Mode】The wall detector has 4 modes, suitable for detecting metal, wood, magnetism, AC wire. You can quickly and accurately fix the position of nails, screws, rebar, wooden beams, AC cables, etc.

【LCD Display and Buzzer】Large LCD display shows the detection mode, depth, signal strength and battery level. When an object is found, it will tell you whether it is closer to the center of the target by the signal strength and beep strength, helping you quickly find the center of the bolt

【Multifunctional】The electrical cable detector is used to find and locate the center and edge of wood and metal studs with a depth of 19 mm; The maximum positioning depth of the deep scan is 38 mm; The maximum metal detection depth reaches 60 mm; AC Scanning can detect AC wires with a depth of 51 mm

【Ergonomic Design】This material detector has a soft grip coating that provides a firm and comfortable grip, ensures safe and comfortable handling and prevents slipping. The unit has a compact design and is small and easy to carry.

【Fast and Accurate Positioning】High precision helps you quickly locate hidden metal in walls, floors and ceilings, wood behind drywall or AC power lines, find the exact location in time. Durable and practical for home, office and workshop. Ideal for professionals and DIY enthusiasts.

Product Description

Wall detectors can detect metal, wooden beams and electrical cables hidden in walls, ceilings and floors. (walls, ceilings and floors refer to conventional concrete, tiles, wood panels, etc.)

LCD display with backlight

This digital stud scanner has a large LCD display and clear sound. The LCD display will show the currently selected mode, and when a material is detected, the LCD display will indicate the direction and intensity.

Simple operation

Four modes are available to meet your basic needs.

Waterproof and durable

The wall detector is safe and waterproof, and can work properly even on rainy days.

Accurate positioning

The intensity of the buzzer will vary depending on the distance between you and the target, you can mark the position with a marker when the sound is loudest. And it has AC warning function.

4 in 1 Function

DEWINNER detector can perform stud scan, depth mode, metal scan and AC scan. Advanced metal detection technology can meet your different work needs.

Wide Application

This metal detector can be used to detect the position of the center of the wood stud in the walls of wooden boards and plasterboards, as well as the position of metal and AC cables, so that you can accurately install TVs, cabinets, drill holes in the wall, etc.

Working Mode

Calibration Tool Before Scanning

Once the mode is selected, press and hold the scan button (on the right of the tool) to calibrate the tool. Wait for the reduction lever to disappear and beep to confirm that the calibration is complete. If you accidentally shake or lift the scanner, the device must be recalibrated and, in metal/AC mode, put in the air for calibration

Scan the wall

Once the stud finder finds the material, the LCD screen will indicate the direction and the intensity of the beep will let you know if you are closer to the target.

Find the stud location

When the signal bar is full and the sound alarm is the loudest, it means you have found the Center of the object. Mark with a pencil