Coilovers Kit for Lexus IS350 IS 250 GSE20 IS F 2006-2013 Saloon RWD

Application:

for Lexus IS250 IS350 GSE20 GSE21 RWD 2006-2013  

for Lexus IS F RWD 2008-2014

For Lexus GS300 GS350 RWD 2007-2011

RWD Only, not fit for AWD
 

Specifications:

Height adjustable: Yes, lowering 25-75mm depending on the vehicle models

Damping : Not adjustable

Spring Rate Front: 12 kg/mm (672 lbs/in)

Spring Rate Rear: 9.5 kg/mm (532 lbs/in)

Spring length Front: 230 mm

Spring length Rear: 230 mm

Front spring inner diameter: 62 mm

Rear spring inner diameter: 63 mm

Front top mount: Standard rubber

Rear top mount: Standard rubber

Camber adjustable: Not available

Spring Preload advised: 7-10 mm

Camber: Not adjustable

Product included:

2x Front coil-overs
2x Rear coil-overs
2x C spanners

Feature

1. Enhanced Handling and Stability:
These springs effectively lower your vehicle's center of gravity, improving cornering stability and reducing body roll for a more responsive and controlled driving experience.

2. Precision Engineering for Superior Functionality:
Each spring is expertly designed to match your vehicle's specific weight and dynamics, ensuring optimal handling and comfort.

3. High-Quality Materials:
Made from SAE 9254 cold-wound steel, providing long-lasting durability.  It has high strength and good elasticity, maintaining stable mechanical properties in high-temperature environments.

4. Superior Corrosion Resistance:
Treated with an advanced anti-corrosion coating, significantly extended lifespan, making them reliable for any driving environment.   This coating protects against moisture, salt, and chemicals, ensuring consistent durability over time.

5. Compatibility and Easy Installation:
These springs are designed for direct installation and are compatible with OEM or aftermarket shocks, allowing for a hassle-free upgrade with minimal modifications.

6. Rigorous Testing:
Undergone extensive testing, including 200,000-cycle fatigue test and 720-hour salt spray test.  These tests ensure exceptional durability and corrosion resistance, allowing them to perform reliably under repeated stress and in harsh environments.

Notice

1. All modifications must be installed by licensed mechanics and in compliance with your local modification regulations.
2. Please ensure all components are tightened with correct torque specifications (which can be found in the vehicle service manual)before and after installation. Any loose nuts, bolts, or locks will cause noise. Do check and tighten before serious problems happen. 
3. Impact wrench is prohibited during the installation, it will loosen or damage the product.
4. Examine the clearance between tires and suspension. ( The minimum clearance should be 4mm, otherwise, you need to add wheel spacers. Caution: It is not sufficient with torsion beam trailing arm axles)
5. We suggest regular maintenance for the coil-over, spray with some WD40 every 3-19 months will keep it smooth and clean, which helps to extend the lifetime.