Coilovers Kit for VW Golf Mk7 5G Hatchback TSI GTE GTD CNG Audi S3 8V 2013-2020

Application: 

For VW Golf MK7 2012-2020 

for Solid Beam Rear Axle Suspension

For Audi A3/S3 (8V) Mk3 2013-2020

For Seat Leon Mk3 2012-2019

For Skoda Octavia Mk3 2012-2019

Specification:

Adjustable height: Front Lowering 30-65mm

Adjustable height: Rear Lowering 30-60mm

Front Top mounts: pillow ball top mount with camber plate

Rear Top mounts: Not Include

Spring rate front: 7kg/mm

Spring rate rear: 5kg/mm

Shock type: Twin tube

Spring Preload: 7-10 mm

Quantity

complete coilovers 2 front and 2 rear

a pair wrench for height adjustment

Specifications

1. Lower height adjustable

2. Dust boot, solid rubber bump stops

3. Weight Saving Aluminum Components And heavy duty Steel Lower Mount Brackets

4. Simple install,  Easy to adjust.

Notice

1. All modifications must be installed by licensed mechanics and in compliance with your local modification regulations.
2. Please ensure all components are tightened with correct torque specifications (which can be found in the vehicle service manual)before and after installation. Any loose nuts, bolts, or locks will cause noise. Do check and tighten before serious problems happen.
3. Impact wrench is prohibited during the installation, it will loosen or damage the product.
4. Examine the clearance between tires and suspension. ( The minimum clearance should be 4mm, otherwise, you need to add wheel spacers. Caution: It is not sufficient with torsion beam trailing arm axles)
5. We suggest regular maintenance for the coil-over, spray with some WD40 every 3-4 months will keep it smooth and clean, which helps to extend the lifetime.