Coilovers Lowering Kit for BMW 3 Series E46 Saloon/Coupe 98-05 E46 Suspension

Notice: No Top Mount Included

Applications

For BMW 3 Series E46 Saloon 1997-2005

316i 318i 320i 323i 325i 328i 330i 318d 320d 330d

For BMW 3 Series E46 Convertible / Cabriolet 2000-2007

318Ci 320Ci 325Ci 323Ci 330Ci 320Cd 330Cd

For BMW 3 Series E46 Coupe 1998-2006

318Ci 320Ci 330Ci 328Ci 316Ci 325Ci 323Ci 320Cd 330Cd

For BMW 3 Series E46 Estate / Touring 1999-2005

316i 318i 320i 325i 323i 328i  330i 318d 320d 330d

Note:

Not for M3
Not for Xi/xd 4 wheel drive
Shoter swaybar end link required.

Specification:

Quantity: 2x Front + 2x Rear + 2x Spanners

Adjustable height: Front & Rear (depends on vehicle models)

Front lowering 30-85mm 

Rear lowering 30-70mm 

Spring rate Front: 8 kg/mm (478 in/lbs)

Spring rate Rear: 10 kg/mm (560 in/lbs)

Damping: fixed damping

Spring length Front: 170mm

Spring length Rear: 190mm

Shock type: Twin tube

Top mounts: not included

Warranty: 2 Years

Package included

2x Front coil-overs
2x Rear coil-overs
2x C spanners

Feature

1.  Lower height adjustable (depends on vehicle models)
2. Dust boot, solid rubber bump stops
3. Weight Saving Aluminum Components And heavy duty Steel Lower Mount Brackets
4. Simple install,  Easy to adjust.
5. Use the vehicle's original upper mounts (not included in our product kit).

Notice

1. All modifications must be installed by licensed mechanics and in compliance with your local modification regulations.
2. Please ensure all components are tightened with correct torque specifications (which can be found in the vehicle service manual)before and after installation. Any loose nuts, bolts, or locks will cause noise. Do check and tighten before serious problems happen. 
3. Impact wrench is prohibited during the installation, it will loosen or damage the product.
4. Examine the clearance between tires and suspension. ( The minimum clearance should be 4mm, otherwise, you need to add wheel spacers. Caution: It is not sufficient with torsion beam trailing arm axles)
5. We suggest regular maintenance for the coil-over, spray with some WD40 every 3-4 months will keep it smooth and clean, which helps to extend the lifetime.