Coilovers Suspension for BMW E39 5 Series Saloon 1995-2003 525 520 528 530

Notice: No Top Mount Included, Modification Required If You Use OE Top Mount

Applications

For BMW 5 E39 1995-2004 RWD Saloon

Model: 520i, 523i, 525i, 528i, 530i, 535i, 540i, 520d, 525d, 530d, 525td, 525tds

Note: Not for Wagon or M5 Models
         Will not fit Self Leveling/Air suspension model
         Front OE top mounts need to be modified , add spacer on shaft

Specifications

Height adjustable: Yes, lowering 0-25mm depending on the vehicle models

Top mounts: Front and rear OE top mounts required

Damping : fixed damping

Spring Rate Rear: 2.5 kg/mm (140 lbs/in)

Front spring inner diameter: 62 mm

Rear spring inner diameter: 62-87 mm

Spring length Front: 170 mm

Spring length Rear: 355 mm

Helper spring rate Front: 1 kg/mm (56 lbs/in)

Helper spring length Front: 102 mm

Spring Preload advised: 7-10 mm

Shock type: Twin tube

Package included

2x Front coil-overs
2x Rear coil-overs
2x C spanners

Feature

1.  0-25mm(depends on vehicle models) lower height adjustable
2. Dust boot, solid rubber bump stops
3. Weight Saving Aluminum Components And heavy duty Steel Lower Mount Brackets
4. Simple install,  Easy to adjust.
5. Use the vehicle's original upper mounts (not included in our product kit).

Notice

1. All modifications must be installed by licensed mechanics and in compliance with your local modification regulations.
2. Please ensure all components are tightened with correct torque specifications (which can be found in the vehicle service manual)before and after installation. Any loose nuts, bolts, or locks will cause noise. Do check and tighten before serious problems happen.
3. Impact wrench is prohibited during the installation, it will loosen or damage the product.
4. Examine the clearance between tires and suspension. ( The minimum clearance should be 4mm, otherwise, you need to add wheel spacers. Caution: It is not sufficient with torsion beam trailing arm axles)
5. We suggest regular maintenance for the coil-over, spray with some WD40 every 3-4 months will keep it smooth and clean, which helps to extend the lifetime.