Coilovers Suspension Kit for Ford Mustang GT S197 Convertible Coupe 2005-2014
You may also like
Compare with similar items
Product information
Description
Application:
for Ford Mustang 2005-2014 Fifth generation
for Ford Mustang S197 2005-2014
for Ford Mustang GT S197 2005-2014
NOT fit Shelby GT500 Models
Specification:
Height adjustable: Yes, lowering 25-75mm depending on the vehicle models
Damping : Not adjustable
Front spring rate: 8 kg/mm (448 lbs/in)
Rear spring rate: 6 kg/mm (336 lbs/in)
Front spring inner diameter: 62 mm
Rear spring inner diameter: 62 mm
Spring length Front: 230 mm
Spring length Rear: 180 mm
Front top mount: Pillow ball bearing camber plate
Rear top mount: OE top mount required
Camber adjustable: Available, front only
Spring Preload advised: 7-10 mm
Twin Tube
Quantity:
2x Front coil-overs
2x Rear coil-overs
2x Swaybar end links
2x C spanners
Feature:
1. Self-design structure and new manufacturing system to give more customers good coil-overs without breaking the bank.
2. Height adjustable---lower your car 25-75mm (depending on vehicle models) to get a performance ride
3. Independent Ride Height and Spring Pre-load Adjustments
4. Twin-Tube System for Comfortable Ride on Streets
5. Coated finish to avoid rust
6. Heavy Duty Steel Lower Mounts
7. Simple install, easy to adjust.
Notice
1. All modifications must be installed by licensed mechanics and in compliance with your local modification regulations.
2. Please ensure all components are tightened with correct torque specifications (which can be found in the vehicle service manual)before and after installation. Any loose nuts, bolts, or locks will cause noise. Do check and tighten before serious problems happen.
3. Impact wrench is prohibited during the installation, it will loosen or damage the product.
4. Examine the clearance between tires and suspension. ( The minimum clearance should be 4mm, otherwise, you need to add wheel spacers. Caution: It is not sufficient with torsion beam trailing arm axles)
5. We suggest regular maintenance for the coil-over, spray with some WD40 every 3-4 months will keep it smooth and clean, which helps to extend the lifetime.
Features
- BrandBFO
- MaterialSteel
- AdjustableYes
- Shock Absorber TechnologyTwin-tube gas
- Complete strut assemblyYes


















