Détecteur de Mur 4 en1 Detecteur de Metaux Mural Avec Écran LCD Détecteur de Montants,Détecteur Avec Batterie 9V Pour Détection Métaux,Fils Électrique,Studs en Bois dans Murs,Sols et Plafonds

[4-in-1 Mode] The wall detector has 4 modes, suitable for detecting metal, wood, magnets, and AC wires. You can quickly and accurately pinpoint the position of nails, screws, rebar, wooden beams, AC cables, etc.

[LCD Screen and Buzzer] Large LCD screen displays the detection mode, depth, signal strength, and battery level. When an object is found, it indicates its proximity to the target center through signal strength and beep volume, helping you quickly locate the center of the bolt.

[Multifunctional] The electrical cable detector is used to find and locate the center and edge of wood and metal studs up to 19 mm deep; the maximum deep scan positioning depth is 38 mm; the maximum metal detection depth reaches 60 mm; AC Scanning can detect AC wires up to 51 mm deep.

[Ergonomic Design] This material detector features a soft grip coating that provides a firm and comfortable hold, ensuring safe and comfortable handling and preventing slippage. The unit has a compact design and is small and easy to carry.

[Fast and Accurate Positioning] High accuracy helps you quickly locate hidden metal in walls, floors, and ceilings, wood behind drywall, or AC power lines, finding the exact location in a timely manner. Durable and convenient for home, office, and workshop use. Ideal for professionals and DIY enthusiasts.

Product Description

Wall detectors can detect metal, wooden beams, and electrical cables hidden in walls, ceilings, and floors.

(Walls, ceilings, and floors refer to conventional concrete, tiles, wood panels, etc.)

Backlit LCD Screen

This digital stud finder features a large LCD screen and clear sound. The LCD will display the currently selected mode, and when a material is detected, the LCD will indicate the direction and intensity.

Simple Operation

Four modes are available to meet your basic needs.

Waterproof and Durable

The wall finder is safe and waterproof and can function properly even on rainy days.

Precise Positioning

The buzzer intensity will vary depending on the distance between you and the target; you can mark the position with a marker when the sound is loudest.

And it has an AC warning function.

4-in-1 Function

The DEWINNER detector can perform stud scans, depth scans, metal scans, and AC scans. Advanced metal detection technology can meet your various work needs.

Wide Application

This metal detector can be used to locate the center of a wooden stud in wood paneling and drywall, as well as the position of metal and AC cables, so you can accurately install TVs, cabinets, drill holes in walls, etc.

Operating Mode

1. Calibrate Tool Before Scanning

Once the mode is selected, press and hold the scan button (on the right side of the tool) to calibrate the tool. Wait until the reduction lever disappears and a beep sounds to confirm that calibration is complete.

If you accidentally shake or lift the scanner, the device must be recalibrated and, in metal/AC mode, held in the air for calibration. 2. Scan the wall. Once the stud finder locates the material, the LCD screen will indicate the direction, and the intensity of the beep will tell you how close you are to the target. 3. Find the stud's location. When the signal bar is full and the audible alarm is at its loudest, it means you have found the center of the object. Mark it with a pencil.