Drybase Flex Adhesive 10kg x 10 Pack

This bundle contains 10 packs of Drybase Flex Adhesive (10kg) - enough to cover approx. 20 m2. Drybase Flex Adhesive is a cement-based bonding compound formulated for securing Drybase Flex Membrane to salt-contaminated or damp masonry surfaces. Supplied in powder form, it mixes easily with clean water and spreads smoothly using a standard trowel. Once applied, the membrane can be pressed into position and is ready to accept plaster within 30 minutes of curing. This adhesive provides excellent adhesion even on damp substrates and complies with EN 12004:2007 for tensile strength and performance. Its rapid setting time and high workability make it ideal for fast-paced remedial work where reliable damp protection is essential. Each 10 kg bag covers approximately 2 m2. The recommended application temperature is above 5 degrees C. For optimal bond, the substrate must be cleaned of dust, laitance and loose materials prior to use. The mixed adhesive should be applied within 30 minutes, and the membrane should be installed within 10 minutes of application.