Drybase TS-Plus Tanking Slurry 20kg & 5-Bar Waterpoofer 4 Litres

This bundle contains Drybase TS-PLUS Tanking Slurry (20kg) and Drybase TS-PLUS 5-Bar Waterproofer (4L). Coverage varies from 3.5 to 5 square metres per kit, depending on the application rate and pressure conditions. Drybase TS-PLUS 5-Bar Waterproofer is a high-performance liquid polymer additive for use with Drybase TS-PLUS Tanking Slurry. When mixed with a 20 kg bag of tanking slurry, the result is an enhanced waterproofing compound with improved workability, adhesion and resistance to cracking. It has been independently tested to withstand water pressure up to 5 bar. The formulation provides an effective barrier to moisture in below-ground environments including basements, foundations, retaining walls and concrete slabs. It conforms to BS 8102:2022 for polymer-cement waterproof coatings in Type A shallow basement structures. The slurry can be applied by brush, trowel or spray, depending on the requirements of the job. Once mixed, it remains workable for around 30 minutes and sets in four to six hours. Suitable substrates include pre-rendered brick and blockwork or prepared concrete. The treated surface is vapour permeable, efflorescence-resistant and capable of bridging minor cracks. Drybase TS-PLUS 5-Bar Waterproofer is supplied in a 4 litre jerry can and should be stored in dry, frost-free conditions between 5 degrees C and 35 degrees C. For reliable waterproofing where active or passive protection is required, this polymer additive ensures a robust and durable finish.