Dryrod Damp Proofing Rods DPC Kit for 6 Linear Metres (9in Wall)

This kits contains Dryrod Damp-Proofing Rods (50-pack, Hole-Clearing Tool, Dryrod Cutting Tool, 2mm x 300mm SDS Masonry Drill bit, Stormdry XR-Mortar (310ml cartridge). The Dryrod DPC Kit (for 6 linear metres of wall) is a professional-grade rising damp treatment system that simplifies the entire installation process. Designed for use in brick, stone, or masonry walls, it provides everything required to create a long-lasting chemical damp-proof course with minimal disruption and no specialist equipment. Inside the kit, you'll find a box of 50 Dryrod damp-proofing rods. Each rod delivers a consistent dose of active water-repellent deep into the mortar bed, curing in situ to block further moisture ingress. The kit includes a Dryzone System Hole Clearing Tool to remove debris from drilled holes before installation, ensuring full contact between the rod and masonry. A dedicated Dryrod Cutting Tool is also included for trimming rods to fit shorter hole depths as required. To prepare the wall, the kit provides a 12 mm by 300 mm SDS masonry drill bit, suitable for drilling insertion holes in 9 inch thick walls. For final sealing, a cartridge of Stormdry XR-Mortar is supplied to close off each installation point, completing the barrier against rising damp. The Dryrod DPC Kit offers proven performance even in very damp walls. This all-in-one solution delivers a clean, precise and effective rising damp treatment.