works fine so far I use it to mount full wheelbarrows upstairs without any problem with a wireless remote control it would be the best
AREBOS Electric Cable Winch Cable Hoist Hoist Crane Cable Hoist 1000W Motor Winch with Cable Remote Control Freight Hoist Lifting Height 12m TÜV Rheinland GS Load Capacity 300kg to 600kg
Buying for your business?
Negotiated prices excl. VAT up to -20%
Product information
Description
[STRONG PERFORMANCE] The cable pull features a high-performance 1000 W copper gear motor and can easily lift heavy loads of 300 kg (without pulley) to 600 kg (with pulley). This ceiling lift is a must for any workshop.
[HIGH-QUALITY] The strong, sturdy steel rope with a thickness of 4,5 mm can withstand especially high pressure and reduces the risk of the load being twisted during lifting. The maximum lifting height is 12 m during normal use, or 6 m when using the pulley.
[FAST & EFFICIENT] The AREBOS electric hoist pulls or lowers loads with a speed of 8 m/min (without pulley) or 4 m/min (with pulley).
[MAXIMUM SAFETY] The chain hoist is equipped with a practical one-hand cable remote control (long 1.5 m cable) with an emergency stop switch and rope brake, which gives you additional safety
Features
- BrandAREBOS
- ColourRed
- Maximum load600 kg
- Remote operationYes
- Supplied with hauling pulleyYes
- Elevation height12 m
- IP ratingIP54
- Width6 cm
- Length65 cm
- MaterialSteel
- Operating ModeElectric
- Weight17 kg
- Presence of brakeYes
- Power1000 W
- Power supplyElectric
- Voltage230 V
- Winch operating typeStraight Line Pull
- Remote control typeCorded
- Type of winchesCrank-operated
- Sold with cableYes
- Traction speed8 m/min
- ManoMano ReferenceME6752699
- MMID261461789752
- Product code4260199757499
- EAN4260199757499
Customer reviews
Too bad the cable is not longer than 5 m because we use it to pull a cart on a rail
Very functional product, we can raise/lower with precision, in short, corresponds to my expectations.
I like the cable length. The movement is quite fast. The plug and control cable are a bit short. Overall I am satisfied.
The design could be improved (pinning the removable axes...) and above all the drilling did not correspond to the angle of the reinforcement arm. Then either we modify the angle, or we move the hole. I moved the piercing. Apart from these small changes, the price / quality ratio is satisfactory.
unpacked, but not yet tested. the winch looks good, good finish. The control cable deserves to be a bit longer.
