Fork Seal Screwdriver, Adjustable High Strength 39-50mm Carbon Steel Slotted Design Oil Seal Ring Driver Tool for Motorcycle Replacement.

Features: 1. High Compatibility: The fork seal driver is suitable for most conventional or inverted front forks. Replacement for Suzuki, etc. 2. Professional Tool: This fork seal driver tool is used to install/replace most front fork seals. It can easily install the seat ring without damaging the shaft seal. It is an indispensable tool for motorcycle maintenance. 3. Split Design: The split design ensures that the new front fork seal will not be damaged during installation. The robust body can evenly press the seal into the front fork tube. 4. Adjustment Range: The adjustment range is 39mm to 50mm/1.54in to 1.97in, which is suitable for most front forks, can be adjusted flexibly, and is easy to use. 5. Long Service Life: The fork oil seal driver tool is made of high-quality carbon steel, offering high strength and durability. Specifications: Item Type: Fork Seal Driver Tool Material: Carbon Steel Adjustment Range: 39-50 mm / 1.54-1.97 inches Fitment: Suzuki Replacement Kawasaki Replacement How to Use: 1. After disassembling the front fork, slide the old seal onto it. 2. Check the stanchions for defects. 3. Lubricate the inner surface of the new seal with fork oil. 4. After sliding the seal onto the top of the stanchion, slide it down onto the slider. 5. Loosen the three crosshead screws and adjust the diameter of the plastic part of the tool to match the seal size. 6. Press the adapter onto the seal and slide the driver tool up and down several times until the seal is pushed into the slider. Package List: 1 x Fork Seal Driver (2 pieces) 1 x Clip