1/5

Turbo charger Turbolader GT3582 GT35 AR0.70 AR 0.63 Anti-Surge T3 Flange

Sale

-30%

~~£212.29~~

Sold by maXpeedingrods GB

Product information

Description

General description

Maxpeedingrods GT35 GT3582 turbocharger is an excellent choice for enhancing the performance of your vehicle. Designed for single turbo applications, it is suitable for 4 or 6-cylinder engines, providing a significant power boost of 20-40% compared to non-turbocharged vehicles. This turbocharger can support horsepower levels of up to 600HP, making it a cost-effective solution for those looking to increase their car's power.

Technical specifications

Turbine Side:

Exhaust Inlet Flange: T3 Flange

Exhaust Outlet Flange: 4-Bolt

Turbine Trim: 84.2

Turbine A/R: 0.63

Turbine Inducer Diameter: 68mm

Turbine Exducer Diameter: 62.4mm

Compressor Side:

Compressor Trim: 56.9

Compressor A/R: 0.7

Compressor Inducer Diameter: 61.5mm

Compressor Exducer Diameter: 81.5mm

Compressor Inlet Size (Air intake): 4 inch (103.5mm)

Compressor Outlet Size: 2.5 inch (63.6mm)

Bearing Type: Floating/Journal Bearing

Thrust Bearing: 270 degree

Cooling Type: Water + Oil Cooling

Maximum PSI: 22

Condition: 100% Brand New

Package Size: 26 x 25 x 23 cm

Package Weight: 8350g

Installation

Before installing the turbocharger, it is essential to follow these guidelines:

Replace the air filter to prevent compressor wheel damage.

Replace the engine oil to avoid damage from impurities.

Run the old turbocharger for 7-10 days before replacing it with the new one.

Ensure the oil drain line is lower than the turbo itself.

Gasoline cars must install a water cooling device to prevent overheating.

Ensure exhaust outlets are well sealed by welding.

Professional installation is highly recommended, as the degree of modification depends on your vehicle.

Usage

This turbocharger is designed for use in 4/6 cylinder and 2.5L-6.0L engines. It is ideal for those looking to enhance their vehicle's performance significantly. Ensure that the cause of any previous turbo failure is addressed before installation to avoid future issues.

Other information

Product Material:

Turbine housing: Ductile iron QT450-10, temperature resistant up to 700℃

Steel turbine wheel: K418 alloy, high oxidation stability and resistance up to 900℃

Compressor housing: ZL104 aluminum, lightweight

Compressor wheel/blades: Cast aluminum blades, superior air tightness & corrosion resistance

100% balancing test by TURBOTECHNICS VSR3

G3-min flow VNT turbo testing

Advanced actuator tester/programmer

Features

Brand
BFO
Length
6.36 cm
Width
27.4 cm
Height
23 cm
Material
Steel

Visit the BFO store

The journey of our automotive aftermarket brand began with a simple yet profound vision: to empower car enthusiasts and owners with top-notch car accessories at unbeatable prices. Our roots lie in a humble workshop, where our team of passionate engineers and craftsmen honed their skills to create high-quality parts, one by one. What sets us apart is our commitment to excellence. We believe that every car deserves the best, regardless of its make or model. That's why we built our own production facility, ensuring that every component we produce meets the highest standards of quality and durability. Our rigorous testing procedures and constant innovation ensure that our products not only look great but also perform flawlessly on the road. More than just a brand, we are a community of enthusiasts who share a common love for cars. We understand the thrill of customizing your ride, the pride of driving a unique vehicle, and the satisfaction of knowing that you've made a smart investment.

You are here: